OpenCores
URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [fuse.log] - Rev 38

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
38 Adding testbench validation ....
We could still have some problem on the data_ready of serial_receiver block		 leonardoaraujo.santos 4399d 14h /uart_block/trunk/hdl/iseProject/fuse.log
35 Bug really fixed... Some testbench results saved... Now would be a nice Idea to start thinking about documentation... leonardoaraujo.santos 4403d 16h /uart_block/trunk/hdl/iseProject/fuse.log
32 Change baud generator to create a overclock frequency of 8x the baud rate....
Change the serial receiver to sample the signal on the middle of the serial input, now it's using only the overclocked baud...		 leonardoaraujo.santos 4405d 00h /uart_block/trunk/hdl/iseProject/fuse.log
24 Working on testbench and refactoring... now we could start some tests on the board... leonardoaraujo.santos 4406d 20h /uart_block/trunk/hdl/iseProject/fuse.log
23 Working on uart_control refactoring leonardoaraujo.santos 4406d 21h /uart_block/trunk/hdl/iseProject/fuse.log
22 Refactoring the uart_control leonardoaraujo.santos 4407d 00h /uart_block/trunk/hdl/iseProject/fuse.log
21 Preparing to rewrite uart_control, adding pin to indicate data available at the RX leonardoaraujo.santos 4407d 06h /uart_block/trunk/hdl/iseProject/fuse.log
20 Finishing at least the tests on testbench.... Was good to verify that the uart_control should be redesigned to allow concurrent receive and to clean the code... leonardoaraujo.santos 4407d 14h /uart_block/trunk/hdl/iseProject/fuse.log
19 Working on the top wishbone slave testbench.... still need some fixes (Both on the testbench and on the uart_control.vhd) leonardoaraujo.santos 4407d 15h /uart_block/trunk/hdl/iseProject/fuse.log
18 sdsd leonardoaraujo.santos 4407d 21h /uart_block/trunk/hdl/iseProject/fuse.log
17 Working on slave testbench and fixing some bugs leonardoaraujo.santos 4407d 23h /uart_block/trunk/hdl/iseProject/fuse.log
16 Adding testbench for wishbone slave module leonardoaraujo.santos 4407d 23h /uart_block/trunk/hdl/iseProject/fuse.log
15 Taking out some warnings and transparent latches from the design leonardoaraujo.santos 4408d 00h /uart_block/trunk/hdl/iseProject/fuse.log
14 Fixing some warnings... Adding wishbone slave leonardoaraujo.santos 4408d 20h /uart_block/trunk/hdl/iseProject/fuse.log
13 Working on uart_control testbench... also applying some fixes... leonardoaraujo.santos 4408d 21h /uart_block/trunk/hdl/iseProject/fuse.log
12 Working on the communication blocks leonardoaraujo.santos 4408d 22h /uart_block/trunk/hdl/iseProject/fuse.log
11 Adding uart_communication_block leonardoaraujo.santos 4409d 00h /uart_block/trunk/hdl/iseProject/fuse.log
10 Working on the control unit part leonardoaraujo.santos 4409d 04h /uart_block/trunk/hdl/iseProject/fuse.log
9 Adding Control unit for uart block leonardoaraujo.santos 4409d 16h /uart_block/trunk/hdl/iseProject/fuse.log
8 Solving some bugs in baud_generator.vhd leonardoaraujo.santos 4410d 02h /uart_block/trunk/hdl/iseProject/fuse.log

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.