URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk] - Rev 36

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
36	Initial commit of EPCS1 (FPGA configuration memory) programmet to update dongle firmware	nuubik	5964d 23h	/usb_dongle_fpga/trunk
35	Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88 (enable/disable memory reads)	nuubik	5964d 23h	/usb_dongle_fpga/trunk
34	For download of v5 dongle tool and manual	nuubik	5967d 00h	/usb_dongle_fpga/trunk
33	For download of v5 web release	nuubik	5967d 00h	/usb_dongle_fpga/trunk
32	For download of v5 datasheet	nuubik	5967d 00h	/usb_dongle_fpga/trunk
31	Newest available schematic	nuubik	5967d 17h	/usb_dongle_fpga/trunk
30	Fixed some typos in document	nuubik	5967d 17h	/usb_dongle_fpga/trunk
29	Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo	nuubik	5967d 17h	/usb_dongle_fpga/trunk
28	Quartus project files for HW code 5 project files	nuubik	5968d 18h	/usb_dongle_fpga/trunk
27	Initial commit of post code logger block and fifo used in the logger	nuubik	5968d 18h	/usb_dongle_fpga/trunk
26	Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output). Added post code logger block and LPC IO write flow control and flash lock when flash is programmed	nuubik	5968d 18h	/usb_dongle_fpga/trunk
25	Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output). Added 64K byte block read when read length is 0	nuubik	5968d 18h	/usb_dongle_fpga/trunk
24	Added changes for new dongle HW code 5 features	nuubik	5968d 18h	/usb_dongle_fpga/trunk
23	Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed. Forced serial port to hw flow control mode. Added support for new dongle HW code 5 to support fast read and fast write modes	nuubik	5968d 18h	/usb_dongle_fpga/trunk
22	Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed	nuubik	5968d 18h	/usb_dongle_fpga/trunk
20	Fix'ed TAR cycle second part this is not critical update	nuubik	5981d 21h	/usb_dongle_fpga/trunk
19	Fix'ed cycle type init code copy/pase mistake	nuubik	5981d 23h	/usb_dongle_fpga/trunk
18	Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side)	nuubik	5982d 22h	/usb_dongle_fpga/trunk
17	changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation)	nuubik	5982d 23h	/usb_dongle_fpga/trunk
16	Synchronisation with OpenCores release	nuubik	6115d 20h	/usb_dongle_fpga/trunk

1 2 Next >

Show All

Browse

Tools

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk] - Rev 36

Filtering Options