Rev |
Log message |
Author |
Age |
Path |
38 |
Tag final OpenCores release w11a_V0.74 |
wfjm |
2789d 20h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
36 |
- Code base cleaned-up for vivado, fsm now inferred
- xsim support complete (but many issues to be resolved yet)
- Added configurable w11a cache
- Removed some never documented and now strategically obsolete designs |
wfjm |
2957d 21h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
35 |
- Add Arty support (BRAM only)
- Add sysmon/xadc support (for nexys4,basys3,arty designs)
- Add Vivado simulator support (DPI not yet working) |
wfjm |
3056d 22h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
30 |
- added RH70/RP/RM big disk support
- many cleanups |
wfjm |
3366d 21h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
29 |
- added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated |
wfjm |
3432d 18h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
22 |
- interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode |
wfjm |
3716d 16h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
19 |
- interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs |
wfjm |
4127d 20h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
18 |
- interim release w11a_V0.561 (untagged)
- Added simple simulation model of Cypress FX2 and test benches for
functional verifcation of FX2 controller
- Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys
- Added test systems for rlink over USB verification for Nexys3 & Atlys |
wfjm |
4224d 21h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
17 |
- interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !! |
wfjm |
4228d 16h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
12 |
- interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards |
wfjm |
4706d 17h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
8 |
- interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys |
wfjm |
4995d 14h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
5 |
additional documentation |
wfjm |
5123d 18h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |
2 |
initial source upload (no docs yet) |
wfjm |
5136d 19h |
/w11/tags/w11a_V0.74/rtl/make_ise/generic_xflow.mk |