Rev |
Log message |
Author |
Age |
Path |
113 |
Lots of updates, mostly focused on getting the XuLA board and CPU able to pass
a comprehensive test suite. At this point, everything passes and logic usage
is down even. Among the few changes includes the "break" bit in the uCC
register, used to indicate a switch to supervisor mode occurred as a result
of a user break, and the ability for the supervisor to clear the instruction
cache. |
dgisselq |
2880d 10h |
/xulalx25soc/trunk/rtl/busmaster.v |
106 |
Minor, inconsequential changes. |
dgisselq |
2889d 04h |
/xulalx25soc/trunk/rtl/busmaster.v |
101 |
Fixed the `defines at the top so that this can be built without any CPU.
This was then used to measure the impact of the CPU on the entire build, as
you could now build with no CPU, and then with a CPU to compare. |
dgisselq |
2889d 04h |
/xulalx25soc/trunk/rtl/busmaster.v |
83 |
Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port. |
dgisselq |
2917d 09h |
/xulalx25soc/trunk/rtl/busmaster.v |
74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
2918d 05h |
/xulalx25soc/trunk/rtl/busmaster.v |
46 |
This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles. |
dgisselq |
2996d 09h |
/xulalx25soc/trunk/rtl/busmaster.v |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3008d 07h |
/xulalx25soc/trunk/rtl/busmaster.v |
18 |
Got the bitfile back up to speed at 80 MHz. |
dgisselq |
3074d 08h |
/xulalx25soc/trunk/rtl/busmaster.v |
9 |
Bug fixes, optimizations, etc. as part of building for an actual hardware
implementation. Most notably, the speed was lowered from 80MHz down to
76 MHz. |
dgisselq |
3076d 06h |
/xulalx25soc/trunk/rtl/busmaster.v |
6 |
Initial file load, likely to be buggy, but the initial load nonetheless. |
dgisselq |
3079d 02h |
/xulalx25soc/trunk/rtl/busmaster.v |
2 |
A very first, albeit incomplete, build. |
dgisselq |
3079d 03h |
/xulalx25soc/trunk/rtl/busmaster.v |