OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk] - Rev 88

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
88 Adjusted copyright date. dgisselq 2934d 14h /xulalx25soc/trunk
87 Placed the interrupt into the carry chain for less logic area. dgisselq 2934d 14h /xulalx25soc/trunk
86 Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth.		 dgisselq 2934d 14h /xulalx25soc/trunk
85 First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.)		 dgisselq 2938d 11h /xulalx25soc/trunk
84 First part of switching to proper sdspi.v, and not just the link. dgisselq 2938d 11h /xulalx25soc/trunk
83 Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port.		 dgisselq 2939d 15h /xulalx25soc/trunk
82 dgisselq 2940d 10h /xulalx25soc/trunk
81 Adds register values for the SD-Card registers. dgisselq 2940d 10h /xulalx25soc/trunk
80 Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested).		 dgisselq 2940d 10h /xulalx25soc/trunk
79 Adds 'bench' and 'sw' targets, and automatically builds them (now). dgisselq 2940d 10h /xulalx25soc/trunk
78 Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result.		 dgisselq 2940d 10h /xulalx25soc/trunk
77 Adds register names and values for the SD card interface. dgisselq 2940d 10h /xulalx25soc/trunk
76 Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device.		 dgisselq 2940d 10h /xulalx25soc/trunk
75 Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.)		 dgisselq 2940d 10h /xulalx25soc/trunk
74 Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged.		 dgisselq 2940d 10h /xulalx25soc/trunk
73 Simplified logic. dgisselq 2940d 10h /xulalx25soc/trunk
72 Sets XULA25 as the default. dgisselq 2940d 11h /xulalx25soc/trunk
71 Needed to play with subtle timing to get this to build. Expect me to play
with these two clock numbers more.		 dgisselq 2940d 11h /xulalx25soc/trunk
70 Cosmetic (minor) update. dgisselq 2940d 11h /xulalx25soc/trunk
69 Massive logic simplification. This is also the first (verified) working
version.		 dgisselq 2940d 11h /xulalx25soc/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.