OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk] - Rev 93

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
93 Oops -- missed adjusting the copyright. dgisselq 2934d 14h /xulalx25soc/trunk
92 Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger.		 dgisselq 2934d 14h /xulalx25soc/trunk
91 Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned.		 dgisselq 2934d 14h /xulalx25soc/trunk
90 Reads and writes to the SD over SPI port now work. The card appears, as of now,
to be fully functional.		 dgisselq 2934d 14h /xulalx25soc/trunk
89 Bug fixes, following the adf_ce logic combining ALU/DIVIDE/FPU pipeline logic
into one register, this fixes that logic so that instructions without their
condition fulfilled are still "executed" and marked as done.		 dgisselq 2934d 14h /xulalx25soc/trunk
88 Adjusted copyright date. dgisselq 2934d 14h /xulalx25soc/trunk
87 Placed the interrupt into the carry chain for less logic area. dgisselq 2934d 14h /xulalx25soc/trunk
86 Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth.		 dgisselq 2934d 14h /xulalx25soc/trunk
85 First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.)		 dgisselq 2938d 11h /xulalx25soc/trunk
84 First part of switching to proper sdspi.v, and not just the link. dgisselq 2938d 11h /xulalx25soc/trunk
83 Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port.		 dgisselq 2939d 15h /xulalx25soc/trunk
82 dgisselq 2940d 10h /xulalx25soc/trunk
81 Adds register values for the SD-Card registers. dgisselq 2940d 10h /xulalx25soc/trunk
80 Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested).		 dgisselq 2940d 10h /xulalx25soc/trunk
79 Adds 'bench' and 'sw' targets, and automatically builds them (now). dgisselq 2940d 10h /xulalx25soc/trunk
78 Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result.		 dgisselq 2940d 10h /xulalx25soc/trunk
77 Adds register names and values for the SD card interface. dgisselq 2940d 10h /xulalx25soc/trunk
76 Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device.		 dgisselq 2940d 10h /xulalx25soc/trunk
75 Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.)		 dgisselq 2940d 10h /xulalx25soc/trunk
74 Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged.		 dgisselq 2940d 10h /xulalx25soc/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.