Rev |
Log message |
Author |
Age |
Path |
146 |
Fixes a problem where the assembler complained the compiler was trying to
move .org backwards. This is now fixed. |
dgisselq |
3033d 17h |
/zipcpu/trunk/sw |
143 |
This section belatedly adjusts the zasm assembler so that it can handle
the LONG_MPY changes that have taken place. However, the test.S assembler
test script is still not properly testing the multiplies--at least it will
succeed on everything else. |
dgisselq |
3033d 18h |
/zipcpu/trunk/sw |
142 |
Bug fix--fixes some problems with conditional execution, as well as removing
an unnecessary peephole optimization. |
dgisselq |
3034d 18h |
/zipcpu/trunk/sw |
141 |
Fixes two bugs: one causing merged strings in the read only string section to
be referenced at the wrong address, and the second which caused the assembler
to fail at SYMBOL-OFFSET references. |
dgisselq |
3034d 18h |
/zipcpu/trunk/sw |
138 |
This updates the CPU multiply instruction into a set of three instructions.
MPY is a 32x32-bit multiply instruction, returning the low 32-bit result,
MPYUHI returns the upper 32-bits assuming the result was unsigned and MPYSHI
returns the upper 32-bits assuming the result was signed. |
dgisselq |
3040d 04h |
/zipcpu/trunk/sw |
137 |
This should (again) fix the bug of trying to build optest.cpp. |
dgisselq |
3053d 22h |
/zipcpu/trunk/sw |
136 |
Oops --- missed a couple HOST_WIDE_INT values in a printf. This casts them
to (long), so that we can work on both PC's and ARMs. |
dgisselq |
3053d 22h |
/zipcpu/trunk/sw |
135 |
Replaced all occurrences of INTVAL(...) on printf lines with (long)INTVAL(...).
This should fix the problems zip-gcc was having while running on the ARM. |
dgisselq |
3053d 22h |
/zipcpu/trunk/sw |
127 |
Lots of changes and bugfixes. The disassembler produces more readable output.
The assembler and linker will no longer automatically use LDIHI--in preparation
for switching to LONG_MPY. LDIHI/LDILO pairs have been changed to BREV/LDILO
pairs. Within the compiler, conditional moves have been rebuilt. They're not
perfect yet, but they are better. Lots of peephole optimizations, etc. |
dgisselq |
3054d 19h |
/zipcpu/trunk/sw |
126 |
Lots of changes preparing the assembly for an instruction set change. While
implemented, they are still commented out via #ifdef LONG_MPY. By defining
LONG_MPY, this new change set will take place. |
dgisselq |
3054d 19h |
/zipcpu/trunk/sw |
125 |
This patch contains minor updates. Two are important to mention: 1) It turns
the compare optimizations back on within the zip.md file, and 2) it fixes an
internal compiler fault that was causing the compiler to such up all of my
memory in an infinite recursion. |
dgisselq |
3063d 03h |
/zipcpu/trunk/sw |
124 |
Lots of changes, lots of bugfixes--both to the compiler as well as to the
assembler. (Ex: the assembler will now properly execute a LDI _sym+5,R0).
Many compiler optimizations have been turned off, however. They will probably
be turned back on in the near future--once I get this version proven without
them. |
dgisselq |
3064d 17h |
/zipcpu/trunk/sw |
123 |
This test now catches and tests some of the pipeline bugs I've been chasing. |
dgisselq |
3064d 17h |
/zipcpu/trunk/sw |
122 |
This represents a major rewrite of the machine definition file, gcc/config/zip/
zip.md. In particular, the architecture has been changed from a "cc0"
architecture to one with a specific CC_REG and CCmode. Instructions in the
machine definition file must now explicitly set this register with their
results. The result is better condition code handling, better usage of the
conditional execution modes of certain instructions, and even some decent
optimizations. |
dgisselq |
3069d 21h |
/zipcpu/trunk/sw |
121 |
Fixed the bug whereby BGE instructions dissassembled as BGT instructions and
vice versa. Loads and stores of absolute addresses now show those addresses
in ($<>). The assembler also accepts integer offsets to symbols, although
it isn't clear that it does the "right" thing with them yet. |
dgisselq |
3069d 21h |
/zipcpu/trunk/sw |
120 |
Should've regression tested that last build. This one fixes what that last
fix broke: Registers with offsets (i.e. operand-B) now work (again). |
dgisselq |
3073d 17h |
/zipcpu/trunk/sw |
119 |
Fixed some limits bugs. Now LDI.Z 1 produces LDIHI.Z 0, LDOLO.Z 1 as desired
instead of the erroneous BREV.Z 0. Likewise, loading 0x80000000 no longer
produces a clear instruction, but actually loads the value of interest. |
dgisselq |
3073d 17h |
/zipcpu/trunk/sw |
117 |
Bug fixes: This adds the zip_ucc() instruction as a builtin, fixes the zip_cc()
builtin (both are now unspec_volatile) together with fixing the *_context(int*)
builtins so that they use five registers, never four. Further, this fixes the
negative stack space offset bug. Many of the GCC files now have Zip debugging
hooks within them as well, to simplify further debugging of the compiler. |
dgisselq |
3074d 03h |
/zipcpu/trunk/sw |
116 |
Updated binutils. This fixes problems with linking global variables, fixes
the map file report, adjusts the LJMP instruction disassembly to display the
resulting address, as well as in general fixing up link problems when
sizeof(byte) is 32-bits. |
dgisselq |
3074d 03h |
/zipcpu/trunk/sw |
114 |
Fixes a bug that killed make binutils before the build-gas directory
was created. |
dgisselq |
3079d 04h |
/zipcpu/trunk/sw |