OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 194

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
194 Finally have a working board. davidgb 1379d 06h /
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1379d 10h /
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1379d 10h /
191 check in file so that you do not need to generate it when running ISE in gui davidgb 1380d 07h /
190 check in file so that you do not need to generate it when running ISE in gui davidgb 1380d 07h /
189 Remove unused file. Created by ISE gui. davidgb 1386d 01h /
188 update options to match what the ISE gui does davidgb 1386d 01h /
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1386d 06h /
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1386d 09h /
185 Reverted back to the single-step version - something was broken davidgb 1386d 11h /
184 update files to correctly produce flex9ram.vhd davidgb 1386d 11h /
183 update file extensions davidgb 1386d 11h /
182 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1386d 11h /
181 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1386d 11h /
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1386d 12h /
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1386d 12h /
178 work on constraints file davidgb 1386d 23h /
177 work on zybo port davidgb 1387d 00h /
176 Don't delete system09_impact.cmd on 'clean' davidgb 1387d 01h /
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1387d 01h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.