Rev |
Log message |
Author |
Age |
Path |
225 |
Added Halt_Ack to go with Halt_Req. |
jshamlet |
1514d 05h |
/ |
224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1514d 07h |
/ |
223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1515d 00h |
/ |
222 |
Created a modified version of the epoch timer with a 32-bit, 1-uS resolution timer/comparator. |
jshamlet |
1515d 05h |
/ |
221 |
o8_vdsm8.vhd now has a default value assigned at compile time, o8_register.vhd was cleaned up some more. |
jshamlet |
1516d 00h |
/ |
220 |
More revision sections added |
jshamlet |
1516d 00h |
/ |
219 |
Added revision block and corrected creation date. |
jshamlet |
1516d 00h |
/ |
218 |
Revision sections added,
vdsm8.vhd added. |
jshamlet |
1516d 01h |
/ |
217 |
Broke out the vdsm8 as a separate entity, since it is used in several places,
Even MORE code cleanup. |
jshamlet |
1516d 01h |
/ |
216 |
Fixed missing parenthesis |
jshamlet |
1516d 03h |
/ |
215 |
More code cleanup |
jshamlet |
1516d 03h |
/ |
214 |
Initial add of some older code |
jshamlet |
1520d 01h |
/ |
213 |
Code and comment cleanup |
jshamlet |
1520d 02h |
/ |
212 |
Fixed issue with rewritten epoch timer not clearing alarm on set point write. |
jshamlet |
1520d 08h |
/ |
211 |
Ok, this time with feeling. Timer should now properly reset on interval update. |
jshamlet |
1521d 05h |
/ |
210 |
Modified the timers to reset on new interval write. This avoids an issue in the original design where the timer had to reach zero before updating, potentially causing unwanted interrupts.
Also added a flag to the CPU to allow interrupts to be processed sequentially based on the state of the I bit. This one is set to false by default, as it is a significant change in interrupt behavior. Long, and reentrant, ISRs can clear the I bit prematurely to allow themselves to be interrupted.
Lastly, added the I bit to the exported flags for possible use in memory protection schemes. |
jshamlet |
1521d 08h |
/ |
209 |
Fixed an issue in the PIT timer that caused an immediate interrupt on interval write,
Fixed an issue in the epoch timer that resulted in a spurious interrupt due to extra LSB's being set by default in the set point register,
While cleaning elsewhere, founding a spacing issue in the CPU HDL,
Added a 4k ROM and MW core. |
jshamlet |
1521d 21h |
/ |
208 |
Removed unnecessary package references |
jshamlet |
1522d 06h |
/ |
207 |
Added a simple 8-bit, fixed asynchronous serial interface with compile time settable bit-rate, parity enable, and parity mode generics. |
jshamlet |
1522d 23h |
/ |
206 |
Merged interrupt logic with other clocked process. |
jshamlet |
1526d 18h |
/ |