Rev |
Log message |
Author |
Age |
Path |
271 |
Removed deleted generic define. |
jshamlet |
1336d 10h |
/ |
270 |
Moved CPU internal constants to o8_cpu.vhd and replace the generic that set the RSP direction flag with a constant instead. This removes the need to expose internal architectural flags externally.
Also added a hard-coded version register that takes a major and minor value as bytes using generics. This is a read-only register to the CPU. |
jshamlet |
1336d 10h |
/ |
269 |
Modified the write data path to use separate enumerated states rather than reuse the .reg field to improve performance. |
jshamlet |
1338d 23h |
/ |
268 |
Added a 16-input external interrupt manager and dedicated SPI tx-only transmitter (for use with DACs, etc.). Also updated the soft-DACs with cleaned up HDL. |
jshamlet |
1339d 00h |
/ |
267 |
Corrected the file description to indicate this is an example package. |
jshamlet |
1339d 00h |
/ |
266 |
Accidentally uploaded incorrect example file for Open8_cfg.vhd |
jshamlet |
1339d 00h |
/ |
265 |
Fixed a bug where "reg" wasn't being initialized with Poly_Init at reset. |
jshamlet |
1431d 09h |
/ |
264 |
Updated comments |
jshamlet |
1441d 06h |
/ |
263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1441d 06h |
/ |
262 |
Added comments to LCD controllers - specifically that reading either register 0 or 1 will return the ready status. This code was already present, but not mentioned in the register map. |
jshamlet |
1450d 10h |
/ |
261 |
Increased delay timer to 7 bits for button press detection. |
jshamlet |
1457d 10h |
/ |
260 |
Added missing comments for Sequential_Interrupts generic, as well as comments explaining portions of the CPU operations. |
jshamlet |
1470d 09h |
/ |
259 |
Fixed issue where Write_Fault wasn't defaulting to '0' when Write_Protect was set to FALSE,
Added a pulse interval measurement entity,
Fixed comments. |
jshamlet |
1470d 10h |
/ |
258 |
Fixed write bug in o8_ltc2355_2p.vhd, added a newer Open8_cfg.vhd, and the sys_tick.vhd utility entity. |
jshamlet |
1471d 08h |
/ |
257 |
Fixed misnamed signal in o8_7seg.vhd and added a replacement switch interface that handles both static and pushbutton switches. |
jshamlet |
1471d 09h |
/ |
256 |
Removed unused generic from the status_led.vhd and cleaned up comments on the CPU |
jshamlet |
1471d 10h |
/ |
255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1471d 14h |
/ |
254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1472d 05h |
/ |
253 |
Fixed spelling error in comment |
jshamlet |
1472d 05h |
/ |
252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1472d 06h |
/ |