| Rev |
Log message |
Author |
Age |
Path |
| 68 |
Fixes the debug ack line, so it no longer acks when there isn't a dbg_stb.
Fixed the multiply option parameter, so it sets a 3-clock multiply properly.
Adjusted the watchdog timer so that it now produces a timer that doesn't
reload--since this is pointless for a watchdog. Finally, connects a reset
line to the DMA, to make certain that resetting the CPU will also reset any
ongoing DMA operation. |
dgisselq |
3070d 13h |
/ |
| 67 |
Simplifies logic, and guarantees that the minimum set value will always
produce an int. For example, if the count was X before, setting X-1 wouldn't
produce an interrupt since it had passed. Now it produces an interrupt, and
keeps the next interrupt valid. |
dgisselq |
3070d 13h |
/ |
| 66 |
Simplified logic (barely). |
dgisselq |
3070d 13h |
/ |
| 65 |
Makes the auto-reload feature a parameterized (generic) feature, so the same
code will work for both auto-reloadable and non-autoreloadable (i.e. watchdog)
timers. |
dgisselq |
3070d 13h |
/ |
| 64 |
First (verified) working version. |
dgisselq |
3070d 13h |
/ |
| 63 |
Simplified logic. |
dgisselq |
3070d 13h |
/ |
| 62 |
Removed the pipe logic from the non-pipelined version, and made the NOOP a
specific ALU instruction so that the PC is always properly updated. |
dgisselq |
3070d 13h |
/ |
| 61 |
Fixed the timing control wires: busy and valid will never both be true. Busy
will be true (now) until valid is asserted, and busy will never not be
asserted until valid is true. |
dgisselq |
3070d 13h |
/ |
| 60 |
LONG_MPY upgrade. This is part of swapping out the LDIHI instruction for a
MPY, and the MPYS and MPYU instructions for MPYSHI and MPYUHI respectively. |
dgisselq |
3070d 13h |
/ |
| 59 |
Simplified logic. |
dgisselq |
3070d 13h |
/ |
| 58 |
Bug fix: the UART can now be reconfigured post-boot without a BREAK condition. |
dgisselq |
3070d 13h |
/ |
| 57 |
Fixed the TX/RX addresses so that they match the documentation: TX first, then
RX. |
dgisselq |
3078d 13h |
/ |
| 56 |
Brings code in line with the OpenCores core: parameterizes the reload value,
and the number of bits in the timer. |
dgisselq |
3078d 13h |
/ |
| 55 |
Updated copyright notice. |
dgisselq |
3078d 13h |
/ |
| 54 |
Updated copyright notice. |
dgisselq |
3078d 13h |
/ |
| 53 |
Added a touch of error checking. |
dgisselq |
3118d 13h |
/ |
| 52 |
This brings the XuLA2-LX25 SoC up to speed with the rest of the ZipCPU, and
prepares it for the 32x32 bit multiply instruction set change. |
dgisselq |
3118d 13h |
/ |
| 51 |
Lots of bug fixes. The ugliest were in the prefetch cache, where instructions
from one cache line were being issued as valid in another. Other fixes include
pipeline fixes so that LOD (Rx),Rx; LOD(Rx),Rx works, and more. Finally, the
decode was adjusted so that brev no longer affects the flags. |
dgisselq |
3128d 12h |
/ |
| 50 |
Updates to fix some broken early branching code, both in idecode and pfcache. |
dgisselq |
3137d 14h |
/ |
| 49 |
Added some documentation to make the read and write calls easier to understand. |
dgisselq |
3146d 14h |
/ |
