Rev |
Log message |
Author |
Age |
Path |
60 |
Removed obsolete README file, this information is now in BUILDING.classic. |
nyawn |
4564d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
59 |
Autotools support. High-speed DLC9 support. Non-priviledged parallel
port access. Altera ByteBlasterII support. Bugfixes and minor speed
improvements. |
nyawn |
4564d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
58 |
Added command line options for USB cables, allowing the user to specify VID
and PID of the cable, to make it easier to use clones. Set the ADBUS4 line
of FT2232-based cables to output / low, as some cables use this as an
active-low output enable (this line is NC on the ORSoC cable). |
nyawn |
4671d 10h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
57 |
Fixed multiple off-by-one allocation size errors which could have caused crashes under the wrong circumstances. |
nyawn |
4815d 09h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
56 |
Added support for GDB hardware watchpoints, which can co-exist with hardware watchpoints set by AdvancedWatchpointControl. Added support for two new packets in adv_jtag_bridge for compatibility with GDB 7.x. Improved full-system testbench for adv_dbg_if, now includes the same OR1K self-test used by adv_jtag_bridge. |
nyawn |
4883d 08h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
55 |
Promoted alternate USB-Blaster driver to full driver status as ft245. Added high-speed support to ft245 driver. Added schemes to limit the clock rate for parallel cables. Re-factored cable driver initialization. |
nyawn |
4985d 09h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
54 |
Added build instructions and Makefile to AdvancedWatchpointControl. Added
copyright headers to AWC source files. Fixed copy/paste error in
adv_jtag_bridge. |
nyawn |
5011d 09h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
53 |
Added includes for FreeBSD support. |
nyawn |
5048d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
52 |
Fixed an error with BSD support I introduced. |
nyawn |
5048d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
51 |
Added support for hardware watchpoints, including a hardware patch for the OR1200v1, changes to adv_jtag_bridge, and a GUI client program. Added a new top-level Patches directory for patches for third-party code. Added FreeBSD support to adv_jtag_bridge (contributed by Wojciech Koszek). |
nyawn |
5049d 08h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
50 |
Switched to explicitly-sized variables, in an attempt to support 64-bit architectures. |
nyawn |
5154d 15h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
45 |
Fixes for compilation under Ubuntu 9.04. |
nyawn |
5202d 12h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
44 |
Added forgotten header file. |
nyawn |
5202d 17h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
43 |
Added forgotten file. |
nyawn |
5202d 17h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
42 |
Added (experimental) Actel UJTAG TAP core. Added JTAG serial port feature to debug hardware core and JTAG bridge program. Added more speedups for USB JTAG cables to bridge program - USB-Blaster users should now see ~30k/sec upload speeds. Updated documentation. |
nyawn |
5202d 17h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
35 |
Updated to include new build options. |
nyawn |
5274d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
32 |
Added a hi-speed mode via a change in protocol in the adv_dbg_if core. This should provide an order-of-magnitude speed improvement for some USB JTAG cables. Updated adv_jtag_bridge to match. Updated adv_dbg_if testbenches. Updated documents to reflect the new hi-speed mode. Added alternate USB-Blaster driver based on libftdi, donated by Xianfeng Zeng. Various bugfixes. |
nyawn |
5275d 10h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
31 |
Multiple users have reported poor performance with parallel ecables. Raul Fajardo determined that the usleep() call was blocking for much longer than microseconds, and that the system still functions perfectly without any added delay at all. Removed this delay. If strange run-time data errors occur, consider adding this sleep back in, a nanosleep, or a busy-wait loop. |
nyawn |
5372d 11h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
29 |
Fixed some mutex deadlocks. Thanks to Raul Fajardo and Jose Villar for reporting these. |
nyawn |
5441d 10h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
22 |
Fixed a bug in the XESS cable's inout function. This is the same bug that was recently fixed in the XPC3 cable. Thanks to Raul Fajardo for pointing this out. |
nyawn |
5457d 14h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |