OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] - Rev 59

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
59 Added modelsim script for reloading a wlf file after a simulation has been rerun. csantifort 4684d 02h /amber/trunk/
58 Use TB.clk_count for the decompiler messages and removed the local counter csantifort 4684d 06h /amber/trunk/
57 Add some debug messages csantifort 4684d 06h /amber/trunk/
56 Remove the timeouts file from svn. Its an output file and gets now just gets created automatically
when sims are run for the first time.
csantifort 4684d 06h /amber/trunk/
55 Added sudo to rm mnt command csantifort 4684d 06h /amber/trunk/
54 Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately
after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers
was selected for writing to for 1 clock cycle.
csantifort 4701d 05h /amber/trunk/
53 Cleaned up Amber Verilog, removing unused signals. csantifort 4716d 03h /amber/trunk/
52 Fixed typo in notes on creating DDR memory interfaces using coregen csantifort 4716d 03h /amber/trunk/
51 Revert vmlinux back to 48. csantifort 4757d 03h /amber/trunk/
50 Revert to previous version csantifort 4757d 03h /amber/trunk/
49 Added a note n how to change timeouts csantifort 4757d 03h /amber/trunk/
48 Fixed a bug in linux that caused the os to not return to the running application after an interrupt.
Hello-world now runs stand-alone again.
Added initrd-200k-dhry, a disk image that uses the dhry program for init.
csantifort 4761d 10h /amber/trunk/
47 Changed V6 VCo from 1000Mhz to 1200 MHz csantifort 4781d 07h /amber/trunk/
46 svn ignore vmlinux.dis and vmlinux.mem csantifort 4789d 05h /amber/trunk/
45 Store vmlinux.mem and vmlinux.dis in compressed form csantifort 4789d 05h /amber/trunk/
44 Updated vmlinux image based on last change csantifort 4789d 05h /amber/trunk/
43 Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test.
Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.
csantifort 4789d 05h /amber/trunk/
42 Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete csantifort 4807d 02h /amber/trunk/
41 Added instructions on how to use Coregen to create the Spartan-6 DDR3 memory interface. csantifort 4808d 10h /amber/trunk/
40 Added wishbone bus jitter testing option.
Cleaned up waveform log .do files, now seperate files for a23 and a25 cores.
Added vmlinux executable elf file for running on hardware.
csantifort 4813d 03h /amber/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.