URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 36

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
36	Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus	csantifort	4792d 00h	/amber/trunk/hw/
35	Amber25 improvements: Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times Use a fast barrel shifter for shifts between 0 and 4 to improve timing Use a 2 cycle full barrel shifter for complex shifts	csantifort	4793d 08h	/amber/trunk/hw/
32	Added clock cycle counting register to test_module to support dhrystone performance measurement	csantifort	4796d 01h	/amber/trunk/hw/
30	Bug fix - a write access was sometimes dropped when it was in a sequence of writes with variable wb_ack delays	csantifort	4809d 08h	/amber/trunk/hw/
29	Use lgo command for saving waveforms in modelsim	csantifort	4811d 01h	/amber/trunk/hw/
27	Got working with cadence nc simulator	csantifort	4844d 09h	/amber/trunk/hw/
25	Bug fix: boot-loader.mem became larger that the allowed 8k byte boot mem size. Removed a struct in elfsplitter.c thats only used for debug - this reduced boot-loader.mem enough so that it fits again. Tidy up: Removed a debug message from hw/tools/run.sh	csantifort	4851d 06h	/amber/trunk/hw/
23	Split the source files list into a Vertex-6 only list and a Spartan-6 only list. That way users don;t need to delete files from the list manually if they only have a setup for one of the FPGA types.	csantifort	4853d 07h	/amber/trunk/hw/
21	Fixed bug in the conditions to create the FPGA configuration log file. I added the creation of the log file in the last release, but the way it was implemented was causing the Makefile to always rebuild from the start.	csantifort	4857d 06h	/amber/trunk/hw/
20	Added feature to A25 core to directly use a read value from the write back stage to reduce the stall to 1 cycle when there is a register conflict with the following instruction. This increases performance by about 3%.	csantifort	4878d 07h	/amber/trunk/hw/
19	Create a configuration log file as part of the synthesis flow. This file is a useful reference to tell the different bitfiles apart.	csantifort	4878d 08h	/amber/trunk/hw/
17	amber25 core bug fix. The return address for irq interrupts was off by 4 bytes when the interrupt occurred during a stm instruction with the following instruction having some register conflicts. Added test irq_stm to catch the bug. Cleaned up some header descriptions	csantifort	4882d 05h	/amber/trunk/hw/
16	Deleted the old version of the 3-state amber core. Its replaced with amber23. Added the 5-state Amber core.	csantifort	4884d 20h	/amber/trunk/hw/
15	Copied amber to amber23, Many system changes to support new amber25 core.	csantifort	4884d 20h	/amber/trunk/hw/
14	Re-wrote the behavioral clock generation code to more accurately calculate the sys_clk frequency. The previous version was not producing the correct frequency at higher frequenies due to rounding errors.	csantifort	4886d 08h	/amber/trunk/hw/
13	Bug fix - added an extra state to the rx state machine to properly align reading the uart input to the middle of each bit.	csantifort	4886d 08h	/amber/trunk/hw/
12	Added INITIALIZE_TO_ZERO parameter to keep instantiation idendical to generic sram models. The parameter is not used in the Xilinx models (they always init to zero) but it used in the generic models.	csantifort	4886d 08h	/amber/trunk/hw/
11	Added vmlinux test.	csantifort	4901d 08h	/amber/trunk/hw/
10	Removed parameters for unused peruipheral modules	csantifort	4902d 12h	/amber/trunk/hw/
9	Change the format of mcr and mrc listings so they exactly match the dissasembly produced by the gnu tools. Write ip instead of r12 in listings.	csantifort	4902d 12h	/amber/trunk/hw/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 36

Filtering Options