URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 44

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
43	Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test. Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.	csantifort	4787d 22h	/amber/trunk/hw/
42	Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete	csantifort	4805d 19h	/amber/trunk/hw/
41	Added instructions on how to use Coregen to create the Spartan-6 DDR3 memory interface.	csantifort	4807d 03h	/amber/trunk/hw/
40	Added wishbone bus jitter testing option. Cleaned up waveform log .do files, now seperate files for a23 and a25 cores. Added vmlinux executable elf file for running on hardware.	csantifort	4811d 20h	/amber/trunk/hw/
39	Added a second level of buffering to a25_wishbone_buf to fix a lockup bug when write acks to not return immediately, and also to improve performance slightly	csantifort	4812d 21h	/amber/trunk/hw/
38	support 128-bit wishbone now used for a25 core	csantifort	4813d 21h	/amber/trunk/hw/
37	128-bit wide boot memory module	csantifort	4814d 19h	/amber/trunk/hw/
36	Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus	csantifort	4814d 20h	/amber/trunk/hw/
35	Amber25 improvements: Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times Use a fast barrel shifter for shifts between 0 and 4 to improve timing Use a 2 cycle full barrel shifter for complex shifts	csantifort	4816d 03h	/amber/trunk/hw/
32	Added clock cycle counting register to test_module to support dhrystone performance measurement	csantifort	4818d 20h	/amber/trunk/hw/
30	Bug fix - a write access was sometimes dropped when it was in a sequence of writes with variable wb_ack delays	csantifort	4832d 03h	/amber/trunk/hw/
29	Use lgo command for saving waveforms in modelsim	csantifort	4833d 21h	/amber/trunk/hw/
27	Got working with cadence nc simulator	csantifort	4867d 04h	/amber/trunk/hw/
25	Bug fix: boot-loader.mem became larger that the allowed 8k byte boot mem size. Removed a struct in elfsplitter.c thats only used for debug - this reduced boot-loader.mem enough so that it fits again. Tidy up: Removed a debug message from hw/tools/run.sh	csantifort	4874d 01h	/amber/trunk/hw/
23	Split the source files list into a Vertex-6 only list and a Spartan-6 only list. That way users don;t need to delete files from the list manually if they only have a setup for one of the FPGA types.	csantifort	4876d 03h	/amber/trunk/hw/
21	Fixed bug in the conditions to create the FPGA configuration log file. I added the creation of the log file in the last release, but the way it was implemented was causing the Makefile to always rebuild from the start.	csantifort	4880d 02h	/amber/trunk/hw/
20	Added feature to A25 core to directly use a read value from the write back stage to reduce the stall to 1 cycle when there is a register conflict with the following instruction. This increases performance by about 3%.	csantifort	4901d 03h	/amber/trunk/hw/
19	Create a configuration log file as part of the synthesis flow. This file is a useful reference to tell the different bitfiles apart.	csantifort	4901d 03h	/amber/trunk/hw/
17	amber25 core bug fix. The return address for irq interrupts was off by 4 bytes when the interrupt occurred during a stm instruction with the following instruction having some register conflicts. Added test irq_stm to catch the bug. Cleaned up some header descriptions	csantifort	4905d 01h	/amber/trunk/hw/
16	Deleted the old version of the 3-state amber core. Its replaced with amber23. Added the 5-state Amber core.	csantifort	4907d 15h	/amber/trunk/hw/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 44

Filtering Options