OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 69

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
68 Remove modelsim files. Only supporting Xilinx isim now. csantifort 4087d 02h /amber/trunk/hw/
67 renamed boot-loader.c to boot-loader-serial.c csantifort 4087d 02h /amber/trunk/hw/
64 Support latest Xilinx ISE 14.5 software. csantifort 4087d 03h /amber/trunk/hw/
63 Add support for Xilinx ISim Verilog simulator.
Remove Virtex-6 files.
csantifort 4087d 07h /amber/trunk/hw/
61 Add new netowkr based boot loader.
Remove support for Virtex. Spartan 6 only now.
csantifort 4374d 01h /amber/trunk/hw/
60 Bug fix; removed a combinational loop from the a25_decode logic. csantifort 4591d 22h /amber/trunk/hw/
59 Added modelsim script for reloading a wlf file after a simulation has been rerun. csantifort 4661d 19h /amber/trunk/hw/
58 Use TB.clk_count for the decompiler messages and removed the local counter csantifort 4661d 22h /amber/trunk/hw/
57 Add some debug messages csantifort 4661d 23h /amber/trunk/hw/
56 Remove the timeouts file from svn. Its an output file and gets now just gets created automatically
when sims are run for the first time.
csantifort 4661d 23h /amber/trunk/hw/
54 Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately
after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers
was selected for writing to for 1 clock cycle.
csantifort 4678d 22h /amber/trunk/hw/
53 Cleaned up Amber Verilog, removing unused signals. csantifort 4693d 20h /amber/trunk/hw/
52 Fixed typo in notes on creating DDR memory interfaces using coregen csantifort 4693d 20h /amber/trunk/hw/
50 Revert to previous version csantifort 4734d 20h /amber/trunk/hw/
49 Added a note n how to change timeouts csantifort 4734d 20h /amber/trunk/hw/
48 Fixed a bug in linux that caused the os to not return to the running application after an interrupt.
Hello-world now runs stand-alone again.
Added initrd-200k-dhry, a disk image that uses the dhry program for init.
csantifort 4739d 03h /amber/trunk/hw/
47 Changed V6 VCo from 1000Mhz to 1200 MHz csantifort 4759d 00h /amber/trunk/hw/
45 Store vmlinux.mem and vmlinux.dis in compressed form csantifort 4766d 22h /amber/trunk/hw/
43 Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test.
Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.
csantifort 4766d 22h /amber/trunk/hw/
42 Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete csantifort 4784d 19h /amber/trunk/hw/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.