OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [branches/] [unneback/] - Rev 278

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.		 mohor 7956d 11h /ethmac/branches/unneback/
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7956d 11h /ethmac/branches/unneback/
276 Defer indication changed. tadejm 7956d 11h /ethmac/branches/unneback/
275 Fix MTxErr or prevent sending too big frames. mohor 7963d 15h /ethmac/branches/unneback/
274 Backup version. Not fully working. tadejm 7964d 04h /ethmac/branches/unneback/
272 When control packets were received, they were ignored in some cases. tadejm 7964d 10h /ethmac/branches/unneback/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7965d 12h /ethmac/branches/unneback/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7966d 12h /ethmac/branches/unneback/
268 Release 1.19. Control frame description changed. mohor 8020d 05h /ethmac/branches/unneback/
267 Full duplex control frames tested. mohor 8020d 08h /ethmac/branches/unneback/
266 Flow control test almost finished. mohor 8025d 07h /ethmac/branches/unneback/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 8025d 11h /ethmac/branches/unneback/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 8025d 22h /ethmac/branches/unneback/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 8025d 22h /ethmac/branches/unneback/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 8025d 22h /ethmac/branches/unneback/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 8026d 10h /ethmac/branches/unneback/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 8027d 00h /ethmac/branches/unneback/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 8027d 00h /ethmac/branches/unneback/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 8027d 00h /ethmac/branches/unneback/
255 TPauseRq synchronized to tx_clk. mohor 8027d 00h /ethmac/branches/unneback/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.