Rev |
Log message |
Author |
Age |
Path |
219 |
txfifo_cnt and rxfifo_cnt counters width is defined in the eth_define.v file,
TxDone and TxRetry are generated after the current WISHBONE access is
finished. |
mohor |
7996d 02h |
/ethmac/tags/rel_14/rtl/verilog/ |
218 |
Typo error fixed. (When using Bist) |
mohor |
7996d 04h |
/ethmac/tags/rel_14/rtl/verilog/ |
214 |
Signals for WISHBONE B3 compliant interface added. |
mohor |
7997d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
213 |
Defines changed to have ETH_ prolog.
ETH_WISHBONE_B# define added. |
mohor |
7997d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
212 |
Minor $display change. |
mohor |
7997d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
211 |
Bist added. |
mohor |
7997d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
210 |
BIST added. |
mohor |
7997d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
204 |
ETH_VIRTUAL_SILICON_RAM supported (for ASIC implementation). |
mohor |
8014d 00h |
/ethmac/tags/rel_14/rtl/verilog/ |
203 |
Virtual Silicon RAM might be used in the ASIC implementation of the ethernet
core. |
mohor |
8014d 00h |
/ethmac/tags/rel_14/rtl/verilog/ |
202 |
CsMiss added. When address between 0x800 and 0xfff is accessed within
Ethernet Core, error acknowledge is generated. |
mohor |
8017d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
168 |
CarrierSenseLost bug fixed when operating in full duplex mode. |
mohor |
8025d 03h |
/ethmac/tags/rel_14/rtl/verilog/ |
167 |
Sometimes both RxB_IRQ and RxE_IRQ were activated. Bug fixed. |
mohor |
8026d 04h |
/ethmac/tags/rel_14/rtl/verilog/ |
166 |
Reception is possible after RxPointer is read and not after BD is read. For
that reason RxBDReady is changed to RxReady.
Busy_IRQ interrupt connected. When there is no RxBD ready and frame
comes, interrupt is generated. |
mohor |
8027d 04h |
/ethmac/tags/rel_14/rtl/verilog/ |
165 |
HASH improvement needed. |
mohor |
8027d 07h |
/ethmac/tags/rel_14/rtl/verilog/ |
164 |
Ethernet debug registers removed. |
mohor |
8027d 07h |
/ethmac/tags/rel_14/rtl/verilog/ |
161 |
Error acknowledge is generated when accessing BDs and RST bit in the
MODER register (r_Rst) is set. |
mohor |
8028d 05h |
/ethmac/tags/rel_14/rtl/verilog/ |
160 |
error acknowledge cycle termination added to display. |
mohor |
8028d 05h |
/ethmac/tags/rel_14/rtl/verilog/ |
159 |
Async reset for WB_ACK_O removed (when core was in reset, it was
impossible to access BDs).
RxPointers and TxPointers names changed to be more descriptive.
TxUnderRun synchronized. |
mohor |
8029d 01h |
/ethmac/tags/rel_14/rtl/verilog/ |
150 |
Debug registers reg1, 2, 3, 4 connected. Synchronization of many signals
changed (bugs fixed). Access to un-alligned buffers fixed. RxAbort signal
was not used OK. |
mohor |
8032d 23h |
/ethmac/tags/rel_14/rtl/verilog/ |
149 |
Signals related to the control frames connected. Debug registers reg1, 2, 3, 4
connected. |
mohor |
8032d 23h |
/ethmac/tags/rel_14/rtl/verilog/ |