| Rev |
Log message |
Author |
Age |
Path |
| 46 |
Corrected error related to the fact that the number of 64-bit words
in the last packet is stored in big-endian format.
Corrected error telated to the fact that the length of the packet reported
to the user space is in bytes not in 64-bit words. |
wzab |
2230d 11h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 45 |
Corrected erroneous assignment of "dbg" signal. |
wzab |
2714d 11h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 44 |
Changed design for Kintex 7 based boards (AFCK, KC705) so that
they use the VEXTPROJ environment for VCS friendly project management
(described in http://doi.org/10.1117/12.2247944 ) |
wzab |
2714d 11h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 43 |
Removed latch on "dbg" signal |
wzab |
2714d 12h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 42 |
KC705 design upgraded to Vivado 2016.4
Corrrected indentation in a few files in AFCK design |
wzab |
2714d 16h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 41 |
The AFCK project upgraded to Vivado 2016.4 |
wzab |
2714d 16h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 40 |
The "jumbo frame version" renamed from "experimental" to "stable". |
wzab |
2714d 22h |
/fade_ether_protocol/trunk/stable_jumbo_frames_version/ |
| 39 |
Added receiver2t4 - program allowing to receive data from 4 links simultaneously |
wzab |
3283d 11h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 38 |
In synthesis scripts added waiting, until bitsream is generated... |
wzab |
3314d 20h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 37 |
Added new design for AFCK board, which uses 8 10 Gbps links.
Additionally added I2C control of the AFCK Si57x based clock.
The I2C controller is driven via VIO blocks controlled by JTAG
interface from Vivado Tcl console.
Tcl scripts are in the fpga/src/AFCK/i2c_tools directory.
To configure clock to 156.25MHz, and to route it to links,
change directory to fpga/src/AFCK/i2c_tools and do
"source start_10g_links.tcl".
After the clock is reprogrammed, reconfigure the FPGA again
(it seems, that there is a problem with reseting links after
clock is reconfigured). |
wzab |
3316d 10h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 36 |
Added signals needed to ensure, that Si570/1 chip generates the clock.
Added signals driving the rate select lines in the SFP+ modules high.
Added two XDC files - the first one for FM-S14 in the FMC1
connector, the second one for FM-S14 in the FMC2 connector. |
wzab |
3332d 13h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 35 |
Changed comment in definition of the descriptor record
Updated IP cores in project for KC705 (to Vivado 2014.4) |
wzab |
3435d 13h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 33 |
Added script for automatic compilation of FADE for AFCK, using Vivado 2014.4 |
wzab |
3451d 23h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 32 |
Added the 4-channel FADE test implementation for the AFCK board. |
wzab |
3452d 03h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 31 |
Added receiver2t_cmd to the Makefile |
wzab |
3456d 16h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 30 |
Corrected error which slows down handling of user commands (the thread
executing the user command used wait_event_timeout instead of
wait_event_timeout_interruptiple).
Added demo program which tests time of execution of the user's
command. |
wzab |
3456d 17h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 29 |
Fixed two mistakes in mutex management (mutex not unlocked, when function leaved after an error)
Fixed dead URL in comments. |
wzab |
3461d 17h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 28 |
Correction of an obvious mistake in the Linux driver, which lead to deadlock
when two applications (or two threads) tried to open the same FADE device. |
wzab |
3465d 16h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 27 |
Added file fade_one_channel, allowing to implement multiple FADE instances in a single FPGA. |
wzab |
3480d 00h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
| 26 |
Corrected small bug in CRC update in eth_sender8,vhd
Added counter of retransmitted packets.
Some minor changes in delay update parameters. |
wzab |
3514d 11h |
/fade_ether_protocol/trunk/experimental_jumbo_frames_version/ |
