Rev |
Log message |
Author |
Age |
Path |
242 |
Added write protect logic to the RAM cores and system timer as part of scheme to keep tasks from messing up the scheduler or other task's memory. The RAM is now divided into regions with a separate write mask register. The write mask register itself is only writeable with the I bit is set (during an interrupt or by setting it using STP PSR_I). The 1K memory is divided into 16, 64 byte regions while the 4K memory is divided into 32, 128 byte regions. The system timer simply checks for the I bit being set when the write protect generic is set.
Note that setting the write_protect generic false, or leaving it unset, will keep the previous behavior. |
jshamlet |
1566d 01h |
/open8_urisc/ |
241 |
Added an Open8 compatible 7-segment display/decoder and uploaded local/private documentation. |
jshamlet |
1570d 20h |
/open8_urisc/ |
240 |
Simplified the vector tx/rx system to a single line. An idle detector replaces the attn_req signal. |
jshamlet |
1573d 00h |
/open8_urisc/ |
239 |
More cleanup and notation of board to board I/O |
jshamlet |
1573d 05h |
/open8_urisc/ |
238 |
Removed extraneous reference to Ints.VEC_Flag from task.s, since it is supposed to be in the init function in test_fn.s. |
jshamlet |
1574d 00h |
/open8_urisc/ |
237 |
Found some errors in the comments and cleaned up unnecessary library references. |
jshamlet |
1574d 03h |
/open8_urisc/ |
236 |
More software cleanup for the Open8_II project |
jshamlet |
1574d 03h |
/open8_urisc/ |
235 |
Ok, this time with feeling. |
jshamlet |
1578d 22h |
/open8_urisc/ |
234 |
Forgot to add documentation |
jshamlet |
1579d 00h |
/open8_urisc/ |
233 |
Updated the Sample Projects.zip |
jshamlet |
1579d 00h |
/open8_urisc/ |
232 |
More code cleanup on sample projects. SDLC2LCD should now match the Open8_II project model. |
jshamlet |
1588d 04h |
/open8_urisc/ |
231 |
Updated sample projects and added elapsed time capture (chronometer) module |
jshamlet |
1588d 04h |
/open8_urisc/ |
230 |
Added two sample projects that show how to connect and program an Open8 system |
jshamlet |
1591d 15h |
/open8_urisc/ |
229 |
Created a new version of the system timer with 24-bit, 1-uS resolution. The new timer has a much different register interface, so it is now o8_sys_timer_ii. |
jshamlet |
1592d 01h |
/open8_urisc/ |
228 |
Added an initialization constant for the OPEN8_BUS_TYPE record. |
jshamlet |
1592d 15h |
/open8_urisc/ |
227 |
Added a demonstration Open8_cfg.vhd file, which is used to configure the system constants. It also provides a function that makes it easy to merge read buses. |
jshamlet |
1592d 22h |
/open8_urisc/ |
226 |
Forgot the updated package file... |
jshamlet |
1593d 02h |
/open8_urisc/ |
225 |
Added Halt_Ack to go with Halt_Req. |
jshamlet |
1593d 02h |
/open8_urisc/ |
224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1593d 04h |
/open8_urisc/ |
223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1593d 21h |
/open8_urisc/ |