URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [rtl/] - Rev 19

Rev	Log message	Author	Age	Path
19	Creates an LED mask portion of writing to the LED's register. Only those bits specified in the mask (bits [7:4]) will be adjusted in the LED register on a write. Hence to set all on, set the LED register to 0x0ff, all off, 0x0f0, or to set LED 0 to on while leaving the others unchanged, set it to 0x011.	dgisselq	2863d 21h	/openarty/trunk/rtl/
17	Fixed the misaddressed I/O peripherals in the fastio peripheral group. In particular, UART and GPS were misaddressed. This has now been fixed, so these peripherals (should) match the spec. Further, the default speed of the two UARTs has been adjusted to 115200/8N1 for the aux UART, and 9600/8N1 for the GPS UART. The Aux UART transmitter also passes testing, so at least that one works.	dgisselq	2865d 21h	/openarty/trunk/rtl/
13	Here are the updates necessary to get the initial Quad SPI flash driver working. This includes in particular the bus interconnect (in fastmaster.v), and the final hookup to the external wires (in fasttop.v).	dgisselq	2865d 22h	/openarty/trunk/rtl/
12	A work in progress. This checkin contains fixes for the flash (mostly), together with some logic reductions facilitating full speed (200MHz) build.	dgisselq	2867d 01h	/openarty/trunk/rtl/
3	Initial set of files. The flash appears to work, memory hasn't been started, the MDIO controller works in simulation, etc. Everything below fasttop.v works at 200MHz (not the CPU---yet).	dgisselq	2882d 05h	/openarty/trunk/rtl/