OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [rtl/] - Rev 82

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
79 Update the GPIO peripheral to fix a potential synchronization issue. olivier.girard 4980d 20h /openmsp430/trunk/core/rtl/
74 Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly.		 olivier.girard 5067d 20h /openmsp430/trunk/core/rtl/
72 Expand configurability options of the program and data memory sizes. olivier.girard 5094d 21h /openmsp430/trunk/core/rtl/
67 Added 16x16 Hardware Multiplier. olivier.girard 5242d 04h /openmsp430/trunk/core/rtl/
66 The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code.		 olivier.girard 5242d 08h /openmsp430/trunk/core/rtl/
60 Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ).		 olivier.girard 5273d 19h /openmsp430/trunk/core/rtl/
57 Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file.		 olivier.girard 5275d 17h /openmsp430/trunk/core/rtl/
53 Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)

Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch.		 olivier.girard 5280d 22h /openmsp430/trunk/core/rtl/
34 To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. olivier.girard 5309d 21h /openmsp430/trunk/core/rtl/
33 In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).

In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created.		 olivier.girard 5309d 22h /openmsp430/trunk/core/rtl/
23 Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct).		 olivier.girard 5430d 23h /openmsp430/trunk/core/rtl/
17 Updated header with SVN info olivier.girard 5456d 19h /openmsp430/trunk/core/rtl/
2 Upload complete openMSP430 project to the SVN repository olivier.girard 5491d 18h /openmsp430/trunk/core/rtl/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.