Rev |
Log message |
Author |
Age |
Path |
174 |
Cleanup dmem_wr generation logic. Important note: this is not a bug fix, only beautification. |
olivier.girard |
4146d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4253d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4338d 13h |
/openmsp430/trunk/core/rtl/verilog/ |
149 |
Update simulation regression result parser.
Fixed failing SFR test (due to newer MSPGCC version).
Implement request http://opencores.org/bug,view,2171 (burst accesses through the serial debug interface) |
olivier.girard |
4341d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4460d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
132 |
Update FPGA examples with the POP.B bug fix |
olivier.girard |
4473d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
130 |
Fixed POP.B bug (see Bugtracker http://opencores.org/bug,assign,2137 ) |
olivier.girard |
4481d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
128 |
Fixed CALL x(SR) bug (see Bugtracker http://opencores.org/bug,view,2111 ) |
olivier.girard |
4557d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4733d 16h |
/openmsp430/trunk/core/rtl/verilog/ |
112 |
Modified comment. |
olivier.girard |
4766d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4767d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4823d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4838d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4843d 21h |
/openmsp430/trunk/core/rtl/verilog/ |
102 |
Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:
- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+ |
olivier.girard |
4844d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
101 |
Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. |
olivier.girard |
4844d 15h |
/openmsp430/trunk/core/rtl/verilog/ |
91 |
Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface. |
olivier.girard |
4856d 16h |
/openmsp430/trunk/core/rtl/verilog/ |
86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4879d 13h |
/openmsp430/trunk/core/rtl/verilog/ |
85 |
Diverse RTL cosmetic updates. |
olivier.girard |
4879d 14h |
/openmsp430/trunk/core/rtl/verilog/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4884d 16h |
/openmsp430/trunk/core/rtl/verilog/ |