OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [rel-0-3-0-rc1/] [or1ksim/] [peripheral/] - Rev 1745

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
1745 These are the changes to allow or1ksim to build as a library as well as a standalone simulator. The concept of a "generic" peripheral is added, which will commuicate with an external model via upcalls. jeremybennett 5786d 21h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1744 Changes to bring behavior into line with the current OpenRISC 1000 specification and support GDB 6.8. A couple of small bugs with handling xterms and opening the remote debug channel are also fixed. Header files have been added to sources in Makefile.am files where they are missing, so that "make tags" will include them. Makefile.in files have been regenerated due to these changes. jeremybennett 5787d 21h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1726 Generate an interrupt when it is time to do so. nogj 6747d 18h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1724 Move all the definitions from gpio_i.h to gpio.c. nogj 6747d 18h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1723 Remove unesecary prototypes from the dma peripheral. nogj 6747d 18h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1722 s/HAS_GRANTPT/HAVE_GRANTPT/ nogj 6747d 18h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1720 Warning/spelling/gramer/useless comment removal fixes. nogj 6747d 18h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1715 Add the capability to the pic to simulate a level or edge triggered pic. Add
a clear_interrupt() function that the peripherals need to use to signal that
they negated their interrupt line.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1714 Add a le16_() macro that will return the data in an appropriate endianness for
the cpu to think the data is little endian. Use the macro in the ata
peripheral.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1713 Add usefull traces to the read/write functions. nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1712 Make heads/sectors/firmware date/supported pio/mwdma modes be configureable from
the config file		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1711 Partially implement the SET_FEATURES command. nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1710 Add write support to the devices. nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1709 Implement the READ_NATIVE_MAX_ADDRESS command. nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1708 Precalculate the size of the drive in sectors. Used very often in the code. nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1707 Allow ata_read_sect() to read more than one sector, reporting status by setting/
clearing appropriate status register bits.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1706 Introduce a helper function ata_calc_lba() to calculate the lba from the device
registers depending on what mode the device is in.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1705 Add a function that is called when the host has transfered all the queued data
from the device.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1704 Clear the _BSY status when commands complete. Set error if an invalid command
was sent.		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/
1703 Introduce a device sub-section into the ata section and avoid confuseing
xx{0,1} parameters		 nogj 6747d 19h /or1k/tags/rel-0-3-0-rc1/or1ksim/peripheral/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.