Rev |
Log message |
Author |
Age |
Path |
22 |
Initial version of the ZipOS operating system construct(s). |
dgisselq |
3004d 01h |
/s6soc/trunk/ |
21 |
Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
20 |
This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
3004d 02h |
/s6soc/trunk/ |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
3009d 19h |
/s6soc/trunk/ |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
3009d 19h |
/s6soc/trunk/ |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
3009d 19h |
/s6soc/trunk/ |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
3010d 17h |
/s6soc/trunk/ |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
3011d 15h |
/s6soc/trunk/ |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
3011d 15h |
/s6soc/trunk/ |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
3011d 15h |
/s6soc/trunk/ |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
3016d 16h |
/s6soc/trunk/ |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
3017d 06h |
/s6soc/trunk/ |
6 |
Initial UCF modifications. Pin layout still isn't complete, but I'm starting
to work it. |
dgisselq |
3038d 01h |
/s6soc/trunk/ |
5 |
These two are my first attempt(s) at a secondary project file, one that can
run as an alternate to the main file but that gives more access to the hardware,
such as programming access to the flash. |
dgisselq |
3038d 01h |
/s6soc/trunk/ |
4 |
Lots of updates, as part of actually making this work on hardware. Not there
yet, so this is still pre-alpha. |
dgisselq |
3038d 01h |
/s6soc/trunk/ |
3 |
Updated date. |
dgisselq |
3038d 01h |
/s6soc/trunk/ |