OpenCores
URL https://opencores.org/ocsvn/sdhc-sc-core/sdhc-sc-core/trunk

Subversion Repositories sdhc-sc-core

[/] [sdhc-sc-core/] [trunk/] [src/] [grpSd/] - Rev 116

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
116 Wishbone interface for sd core started rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
114 Read works with model too. rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
113 Read with single block works on cards, but not in simulation. SdData.sv
sends data with one "XXXX" cycle right before the crc.		 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
112 Save wide mode with out gHighSpeedMode = true rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
111 Sclk moved to neg. edge -> setup and hold times for fast mode are easier
to reach. (only micro sd does not work in fast mode).		 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
110 All except microsd work in highspeed mode. rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
109 Added a data ram. rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
108 Added a ram to the testbed rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
106 Fixes #29: All cards respond, but they do not all work. rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
105 Changing speed works! refs #33 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
104 SdController: Configuration ready to switch to high speed, refs #33 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
103 SdController: Checking speed works rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
102 SdController: Enabling wide mode works, refs #33 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
101 Receiving response to ACMD51 works including data, refs #33. rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
100 SdController: Receiving data after ACMD51, but CRC is wrong rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
99 SdController: Checking bus width without receiving data response rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
98 SdController: Receive response to CMD7 (except when busy is activated) rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
97 SdController: CMD55 out of main state into Region rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
96 SdController: Region extracted from main state, select card in config
state		 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/
95 SdController: entity and architecture split, all outputs registered
SdCardModel: Delay between response and next command added
SdData: Busy checking

refs #33		 rkastl 4928d 18h /sdhc-sc-core/trunk/src/grpSd/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.