OpenCores
URL https://opencores.org/ocsvn/t48/t48/trunk

Subversion Repositories t48

[/] [t48/] [tags/] [rel_1_0/] [rtl/] [vhdl/] - Rev 207

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
207 entity changes for P2 low impedance trigger issue arniml 6825d 19h /t48/tags/rel_1_0/rtl/vhdl/
206 * change low impedance markers for P2
separate marker for low and high part
* p2_o output is also registered to prevent combinational
output to pads
arniml 6825d 19h /t48/tags/rel_1_0/rtl/vhdl/
205 operate ale_q and int_q with xtal_i after shift of ALE assertion to XTAL3 arniml 6825d 19h /t48/tags/rel_1_0/rtl/vhdl/
204 * suppress p2_output_pch_o when p2_output_exp is active
* wire xtal_i to interrupt module
arniml 6825d 19h /t48/tags/rel_1_0/rtl/vhdl/
203 * shift assertion of ALE and PROG to xtal3
* correct change of revision 1.8
arniml 6825d 19h /t48/tags/rel_1_0/rtl/vhdl/
195 Suppress assertion of bus_read_bus_s when interrupt is pending.
This should fix bug report
"PROBLEM WHEN INT AND JMP"
arniml 6827d 06h /t48/tags/rel_1_0/rtl/vhdl/
188 move check for int_pending_s into ea_i_='0' branch
this fixes a glitch on PCH when an interrutp occurs
during external program memory fetch
arniml 6874d 19h /t48/tags/rel_1_0/rtl/vhdl/
187 Fix bug reports:
"Target address of JMP to Program Memory Bank 1 corrupted by interrupt"
"Return address of CALL to Program Memory Bank 1 corrupted by interrupt"
int_in_progress_o was active one cycle before int_pending_o is
asserted. this confused the mb multiplexer which determines the state of
the memory bank selection flag
arniml 6874d 19h /t48/tags/rel_1_0/rtl/vhdl/
183 fix missing assignment to outclock arniml 6880d 22h /t48/tags/rel_1_0/rtl/vhdl/
180 introduce prefix 't48_' for wb_master entity and configuration arniml 6969d 06h /t48/tags/rel_1_0/rtl/vhdl/
179 introduce prefix 't48_' for all packages, entities and configurations arniml 6969d 06h /t48/tags/rel_1_0/rtl/vhdl/
178 Move latching of BUS to MSTATE2
-> sample BUS at the end of RD'
arniml 6970d 18h /t48/tags/rel_1_0/rtl/vhdl/
177 Implement db_dir_o glitch-safe arniml 6970d 18h /t48/tags/rel_1_0/rtl/vhdl/
176 Use en_clk_i instead of xtal3_s for generation of external signals.
This is required when the core runs with full xtal clock instead
of xtal/3 (xtal_div_3_g = 0).
arniml 6970d 18h /t48/tags/rel_1_0/rtl/vhdl/
174 fix bug report
"MSB of Program Counter changed upon PC increment"
arniml 6971d 21h /t48/tags/rel_1_0/rtl/vhdl/
172 save data from wishbone bus in register bank with wb_ack
necessary to hold data from peripheral/memory until it is read by T48
arniml 7000d 17h /t48/tags/rel_1_0/rtl/vhdl/
171 remove obsolete output stack_high_o arniml 7001d 18h /t48/tags/rel_1_0/rtl/vhdl/
169 initial check-in arniml 7003d 05h /t48/tags/rel_1_0/rtl/vhdl/
168 change address range of wb_master arniml 7003d 05h /t48/tags/rel_1_0/rtl/vhdl/
167 simplify address range:
- configuration range
- Wishbone range
arniml 7003d 05h /t48/tags/rel_1_0/rtl/vhdl/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.