OpenCores
URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [xst/] [work/] - Rev 36

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
36 Working on the documentation leonardoaraujo.santos 4429d 09h /uart_block/trunk/hdl/iseProject/xst/work/
35 Bug really fixed... Some testbench results saved... Now would be a nice Idea to start thinking about documentation... leonardoaraujo.santos 4432d 10h /uart_block/trunk/hdl/iseProject/xst/work/
34 Seems that the issue is solved (working on Spartan3E board and confirmed with chipscope) leonardoaraujo.santos 4432d 13h /uart_block/trunk/hdl/iseProject/xst/work/
32 Change baud generator to create a overclock frequency of 8x the baud rate....
Change the serial receiver to sample the signal on the middle of the serial input, now it's using only the overclocked baud...		 leonardoaraujo.santos 4433d 18h /uart_block/trunk/hdl/iseProject/xst/work/
31 Working on documentation and on Chipscope leonardoaraujo.santos 4434d 06h /uart_block/trunk/hdl/iseProject/xst/work/
30 Preparing to work with chipscope leonardoaraujo.santos 4434d 06h /uart_block/trunk/hdl/iseProject/xst/work/
29 Preparing to work with chipscope leonardoaraujo.santos 4434d 07h /uart_block/trunk/hdl/iseProject/xst/work/
28 Changing wrong datasheet of Spartan3A kit for newer one.... Detected some bug on the reception (When is fast it seems that the reception could be wrong...) leonardoaraujo.santos 4434d 08h /uart_block/trunk/hdl/iseProject/xst/work/
27 First version seems working nice on the PC!!! leonardoaraujo.santos 4434d 08h /uart_block/trunk/hdl/iseProject/xst/work/
24 Working on testbench and refactoring... now we could start some tests on the board... leonardoaraujo.santos 4435d 13h /uart_block/trunk/hdl/iseProject/xst/work/
22 Refactoring the uart_control leonardoaraujo.santos 4435d 17h /uart_block/trunk/hdl/iseProject/xst/work/
21 Preparing to rewrite uart_control, adding pin to indicate data available at the RX leonardoaraujo.santos 4436d 00h /uart_block/trunk/hdl/iseProject/xst/work/
20 Finishing at least the tests on testbench.... Was good to verify that the uart_control should be redesigned to allow concurrent receive and to clean the code... leonardoaraujo.santos 4436d 08h /uart_block/trunk/hdl/iseProject/xst/work/
19 Working on the top wishbone slave testbench.... still need some fixes (Both on the testbench and on the uart_control.vhd) leonardoaraujo.santos 4436d 08h /uart_block/trunk/hdl/iseProject/xst/work/
16 Adding testbench for wishbone slave module leonardoaraujo.santos 4436d 17h /uart_block/trunk/hdl/iseProject/xst/work/
15 Taking out some warnings and transparent latches from the design leonardoaraujo.santos 4436d 18h /uart_block/trunk/hdl/iseProject/xst/work/
14 Fixing some warnings... Adding wishbone slave leonardoaraujo.santos 4437d 14h /uart_block/trunk/hdl/iseProject/xst/work/
13 Working on uart_control testbench... also applying some fixes... leonardoaraujo.santos 4437d 14h /uart_block/trunk/hdl/iseProject/xst/work/
11 Adding uart_communication_block leonardoaraujo.santos 4437d 18h /uart_block/trunk/hdl/iseProject/xst/work/
6 Adding baud generator leonardoaraujo.santos 4439d 17h /uart_block/trunk/hdl/iseProject/xst/work/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.