OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [tags/] [version_1_5/] - Rev 25

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5950d 22h /usb_dongle_fpga/tags/version_1_5/
24 Added changes for new dongle HW code 5 features nuubik 5950d 23h /usb_dongle_fpga/tags/version_1_5/
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5950d 23h /usb_dongle_fpga/tags/version_1_5/
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5950d 23h /usb_dongle_fpga/tags/version_1_5/
20 Fix'ed TAR cycle second part this is not critical update nuubik 5964d 01h /usb_dongle_fpga/tags/version_1_5/
19 Fix'ed cycle type init code copy/pase mistake nuubik 5964d 03h /usb_dongle_fpga/tags/version_1_5/
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5965d 02h /usb_dongle_fpga/tags/version_1_5/
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5965d 03h /usb_dongle_fpga/tags/version_1_5/
16 Synchronisation with OpenCores release nuubik 6098d 00h /usb_dongle_fpga/tags/version_1_5/
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6215d 02h /usb_dongle_fpga/tags/version_1_5/
14 added comment on POR time influence when booting from LPC dongle nuubik 6227d 02h /usb_dongle_fpga/tags/version_1_5/
12 Added windows py bindings check with nice info print with link to installer nuubik 6328d 19h /usb_dongle_fpga/tags/version_1_5/
11 one ; in line end possible runtime error nuubik 6328d 19h /usb_dongle_fpga/tags/version_1_5/
10 fixed a typo nuubik 6332d 17h /usb_dongle_fpga/tags/version_1_5/
9 Made failing on port open retry nuubik 6332d 17h /usb_dongle_fpga/tags/version_1_5/
8 Added PCB level test options nuubik 6333d 01h /usb_dongle_fpga/tags/version_1_5/
7 Fixed pin modes and resyntesized nuubik 6333d 01h /usb_dongle_fpga/tags/version_1_5/
6 Fixed Cyclon part no in datasheets and drawings nuubik 6369d 22h /usb_dongle_fpga/tags/version_1_5/
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6395d 18h /usb_dongle_fpga/tags/version_1_5/
3 Changed outputs to LVCMOS and lowered drive current to 2mA to avoid noise on longer tracs and fast switching speeds nuubik 6395d 18h /usb_dongle_fpga/tags/version_1_5/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.