OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [tags/] [version_1_5/] - Rev 26

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5950d 12h /usb_dongle_fpga/tags/version_1_5/
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5950d 12h /usb_dongle_fpga/tags/version_1_5/
24 Added changes for new dongle HW code 5 features nuubik 5950d 12h /usb_dongle_fpga/tags/version_1_5/
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5950d 12h /usb_dongle_fpga/tags/version_1_5/
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5950d 12h /usb_dongle_fpga/tags/version_1_5/
20 Fix'ed TAR cycle second part this is not critical update nuubik 5963d 15h /usb_dongle_fpga/tags/version_1_5/
19 Fix'ed cycle type init code copy/pase mistake nuubik 5963d 17h /usb_dongle_fpga/tags/version_1_5/
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5964d 16h /usb_dongle_fpga/tags/version_1_5/
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5964d 17h /usb_dongle_fpga/tags/version_1_5/
16 Synchronisation with OpenCores release nuubik 6097d 14h /usb_dongle_fpga/tags/version_1_5/
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6214d 16h /usb_dongle_fpga/tags/version_1_5/
14 added comment on POR time influence when booting from LPC dongle nuubik 6226d 15h /usb_dongle_fpga/tags/version_1_5/
12 Added windows py bindings check with nice info print with link to installer nuubik 6328d 09h /usb_dongle_fpga/tags/version_1_5/
11 one ; in line end possible runtime error nuubik 6328d 09h /usb_dongle_fpga/tags/version_1_5/
10 fixed a typo nuubik 6332d 07h /usb_dongle_fpga/tags/version_1_5/
9 Made failing on port open retry nuubik 6332d 07h /usb_dongle_fpga/tags/version_1_5/
8 Added PCB level test options nuubik 6332d 14h /usb_dongle_fpga/tags/version_1_5/
7 Fixed pin modes and resyntesized nuubik 6332d 14h /usb_dongle_fpga/tags/version_1_5/
6 Fixed Cyclon part no in datasheets and drawings nuubik 6369d 12h /usb_dongle_fpga/tags/version_1_5/
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6395d 08h /usb_dongle_fpga/tags/version_1_5/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.