OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [tags/] [version_1_5/] - Rev 36

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
36 Initial commit of EPCS1 (FPGA configuration memory) programmet to update dongle firmware nuubik 5960d 16h /usb_dongle_fpga/tags/version_1_5/
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 5960d 16h /usb_dongle_fpga/tags/version_1_5/
34 For download of v5 dongle tool and manual nuubik 5962d 17h /usb_dongle_fpga/tags/version_1_5/
33 For download of v5 web release nuubik 5962d 17h /usb_dongle_fpga/tags/version_1_5/
32 For download of v5 datasheet nuubik 5962d 17h /usb_dongle_fpga/tags/version_1_5/
31 Newest available schematic nuubik 5963d 10h /usb_dongle_fpga/tags/version_1_5/
30 Fixed some typos in document nuubik 5963d 10h /usb_dongle_fpga/tags/version_1_5/
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 5963d 10h /usb_dongle_fpga/tags/version_1_5/
28 Quartus project files for HW code 5 project files nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
27 Initial commit of post code logger block and fifo used in the logger nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
24 Added changes for new dongle HW code 5 features nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5964d 11h /usb_dongle_fpga/tags/version_1_5/
20 Fix'ed TAR cycle second part this is not critical update nuubik 5977d 14h /usb_dongle_fpga/tags/version_1_5/
19 Fix'ed cycle type init code copy/pase mistake nuubik 5977d 16h /usb_dongle_fpga/tags/version_1_5/
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5978d 15h /usb_dongle_fpga/tags/version_1_5/
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5978d 16h /usb_dongle_fpga/tags/version_1_5/
16 Synchronisation with OpenCores release nuubik 6111d 13h /usb_dongle_fpga/tags/version_1_5/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.