Rev |
Log message |
Author |
Age |
Path |
24 |
- major release w11a_V0.60 (tagged) |
wfjm |
3732d 20h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
22 |
- interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode |
wfjm |
3740d 21h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
20 |
- interim release w11a_V0.57 (untagged)
- new C++ and Tcl based backend server supports now RK11 handling
- w11a systems operate with rlink over USB on nexsy2 and nexsy3 boards.
See w11a_os_guide.txt for details |
wfjm |
4138d 05h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
19 |
- interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs |
wfjm |
4152d 02h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
17 |
- interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !! |
wfjm |
4252d 22h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
16 |
- interim release w11a_V0.55 (untagged)
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems |
wfjm |
4629d 08h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
15 |
- interim release w11a_V0.54 (untagged)
- add Nexys3 port of w11a |
wfjm |
4647d 22h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
13 |
- interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std |
wfjm |
4662d 06h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
12 |
- interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards |
wfjm |
4730d 22h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
9 |
- interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames |
wfjm |
4984d 05h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
8 |
- interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys |
wfjm |
5019d 20h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
3 |
setup all svn:ignore props |
wfjm |
5161d 01h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |
2 |
initial source upload (no docs yet) |
wfjm |
5161d 01h |
/w11/tags/w11a_V0.6/rtl/sys_gen/w11a/nexys2/ |