Rev |
Log message |
Author |
Age |
Path |
33 |
- major release w11a_V0.70 (tagged) |
wfjm |
3344d 04h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
30 |
- added RH70/RP/RM big disk support
- many cleanups |
wfjm |
3382d 03h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
29 |
- added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated |
wfjm |
3448d 01h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
25 |
- The div instruction gave wrong results in some corner cases when either
divisor or quotient were the largest negative integer (100000 or -32768).
This is corrected now, for details see ECO-026-div.txt
- some minor updates and fixes to support scripts
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt |
wfjm |
3659d 06h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
19 |
- interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs |
wfjm |
4143d 03h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
17 |
- interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !! |
wfjm |
4243d 23h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
16 |
- interim release w11a_V0.55 (untagged)
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems |
wfjm |
4620d 10h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
13 |
- interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std |
wfjm |
4653d 08h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
12 |
- interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards |
wfjm |
4721d 23h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
10 |
- add sources for C++/Tcl based backend, add directories
- tools/src/...
- tools/tcl/...
- tools/dox
- tools/make
- add rlink test system
- rtl/sys_gen/tst_rlink/nexys2/... |
wfjm |
4885d 09h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
9 |
- interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames |
wfjm |
4975d 07h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
8 |
- interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys |
wfjm |
5010d 21h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
3 |
setup all svn:ignore props |
wfjm |
5152d 02h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |
2 |
initial source upload (no docs yet) |
wfjm |
5152d 02h |
/w11/tags/w11a_V0.7/rtl/bplib/s3board/tb/ |