OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk/] [bench/] [cpp/] - Rev 96

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
96 Now accepts an SD-Card backing file, so that SD-Card reads *and* writes can be
tested.		 dgisselq 2913d 20h /xulalx25soc/trunk/bench/cpp/
95 Added write capability to the SD-SPI simulator. dgisselq 2913d 20h /xulalx25soc/trunk/bench/cpp/
94 Fixes a bug which had caused the device to die artificially and early, just
simply because the program connecting to the simulator shut its pipe down before
getting our last message. We now ignore this signal and continue.		 dgisselq 2913d 20h /xulalx25soc/trunk/bench/cpp/
75 Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.)		 dgisselq 2919d 16h /xulalx25soc/trunk/bench/cpp/
47 Fixes the "NAN" clocks/second output, as well as making input timing come closer
to a realistic timing. (I actually don't know what timing the JTAG port is
providing, but ... the new timer is closer.)		 dgisselq 2997d 20h /xulalx25soc/trunk/bench/cpp/
37 These fixes were necessary to get the SDRAM into a working simulation
capability. It is finally what it was supposed to be: cycle accurate. Sadly,
to do this, I did need to make a subtle change to rtl/wbsdram.v. (I was having
a problem with external input clocking in Verilator. This fixes it--but its
a Verilator only change--to rtl/wbsdram.v that is.)		 dgisselq 3005d 20h /xulalx25soc/trunk/bench/cpp/
31 A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25.		 dgisselq 3009d 19h /xulalx25soc/trunk/bench/cpp/
4 Here's an initial, albeit incomplete, build. dgisselq 3080d 15h /xulalx25soc/trunk/bench/cpp/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.