Rev |
Log message |
Author |
Age |
Path |
93 |
Oops -- missed adjusting the copyright. |
dgisselq |
3032d 07h |
/xulalx25soc/trunk/sw/ |
92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
3032d 07h |
/xulalx25soc/trunk/sw/ |
91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
3032d 07h |
/xulalx25soc/trunk/sw/ |
78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
3038d 03h |
/xulalx25soc/trunk/sw/ |
77 |
Adds register names and values for the SD card interface. |
dgisselq |
3038d 03h |
/xulalx25soc/trunk/sw/ |
76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
3038d 03h |
/xulalx25soc/trunk/sw/ |
53 |
Added a touch of error checking. |
dgisselq |
3086d 05h |
/xulalx25soc/trunk/sw/ |
49 |
Added some documentation to make the read and write calls easier to understand. |
dgisselq |
3114d 06h |
/xulalx25soc/trunk/sw/ |
46 |
This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles. |
dgisselq |
3116d 07h |
/xulalx25soc/trunk/sw/ |
42 |
Minor changes. |
dgisselq |
3120d 03h |
/xulalx25soc/trunk/sw/ |
41 |
Bug fix. This was preventing dumpsdram from accurately reading back what
had been written to the RAM earlier. |
dgisselq |
3120d 03h |
/xulalx25soc/trunk/sw/ |
40 |
This adds to dumpsdram the capability to run over a port, such as with
busmaster_tb. |
dgisselq |
3121d 14h |
/xulalx25soc/trunk/sw/ |
38 |
Updated to remove the build dependence upon ZipCPU. |
dgisselq |
3123d 13h |
/xulalx25soc/trunk/sw/ |
33 |
Oops -- the audio was wired audio first then the interrupt controller, not
the other way around. This adjusts regdefs to match what's on the chip. |
dgisselq |
3128d 06h |
/xulalx25soc/trunk/sw/ |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3128d 06h |
/xulalx25soc/trunk/sw/ |
30 |
Bug fixes. In particular, this fixes a segmentation violation. |
dgisselq |
3128d 11h |
/xulalx25soc/trunk/sw/ |
29 |
This adds a vastly updated and superious ziprun capability to the repository.
ziprun now accepts ELF program files *only*, reads them, and places them onto
the board. This includes the ability, within the ELF file, of specifying
whether or not the data is sent to block ram, SD ram, or Flash, as well as
the ability of specifying the initial address. (Of course, that's a one time
thing--to always have the same initial address, set the address in
rtl/busmaster.v) |
dgisselq |
3129d 03h |
/xulalx25soc/trunk/sw/ |
28 |
Oops--two files needed by zipdbg weren't originally placed in the directory. |
dgisselq |
3129d 07h |
/xulalx25soc/trunk/sw/ |
25 |
Fixing compile time warnings. |
dgisselq |
3129d 07h |
/xulalx25soc/trunk/sw/ |
24 |
Added the #define necessary to enable (and clear) SCOPE interrupts. |
dgisselq |
3135d 05h |
/xulalx25soc/trunk/sw/ |