Rev |
Log message |
Author |
Age |
Path |
177 |
Fixed the illegal address logic to be more precise. |
dgisselq |
2850d 04h |
/zipcpu/trunk/rtl/core/ |
176 |
Switched from distributed to block RAM, and adjusted the logic to help
timing closure. The resulting core will build in designs up to 200MHz in
speed. |
dgisselq |
2850d 04h |
/zipcpu/trunk/rtl/core/ |
175 |
Fixed the carry bit for logical shifts: it is the last bit shifted out of the
register. 0x80000000>>32 yields a 0 with carry set. Anything logically
shifted by a number greater than thirty two clears carry and register. |
dgisselq |
2850d 04h |
/zipcpu/trunk/rtl/core/ |
174 |
Simplified the divide to improve timing performance. |
dgisselq |
2850d 04h |
/zipcpu/trunk/rtl/core/ |
160 |
Logic updates, and bug fix corrections to bring this in line with the current
XuLA2-LX25 SoC version. (i.e., the XuLA version was debugged and improved,
this update pushes those improvements to the mainline.) |
dgisselq |
2942d 23h |
/zipcpu/trunk/rtl/core/ |
145 |
This fixes the pipelined memory problem that was introduced a while back to
fix ... pipelined memory conflicts. This appears to maintain the success
of the fix, while recovering the pipeline memory performance that was had
before. |
dgisselq |
2975d 22h |
/zipcpu/trunk/rtl/core/ |
140 |
Minor changes, but fixes build of zippy_tb.cpp. |
dgisselq |
2979d 11h |
/zipcpu/trunk/rtl/core/ |
138 |
This updates the CPU multiply instruction into a set of three instructions.
MPY is a 32x32-bit multiply instruction, returning the low 32-bit result,
MPYUHI returns the upper 32-bits assuming the result was unsigned and MPYSHI
returns the upper 32-bits assuming the result was signed. |
dgisselq |
2982d 09h |
/zipcpu/trunk/rtl/core/ |
133 |
Changes preceding an instruction set update, which will change the multiply
operation from a 16x16 bit multiply to three types of 32x32-bit multiplies. |
dgisselq |
2996d 23h |
/zipcpu/trunk/rtl/core/ |
132 |
Lots of minor bug fixes. |
dgisselq |
2996d 23h |
/zipcpu/trunk/rtl/core/ |
131 |
Fixed a variable use before declaration error. |
dgisselq |
2997d 00h |
/zipcpu/trunk/rtl/core/ |
130 |
Simplified the lock logic, and removed it when pipelining was not defined. This
also means the file is now dependent upon cpudefs.v. In another change, brev
was modified so as not to update the flags. This makes it useable with GCC
as a potential move or load immediate instruction. |
dgisselq |
2997d 00h |
/zipcpu/trunk/rtl/core/ |
129 |
Bug fix. Fixes some ugly race conditions that would cause code from the wrong
address to be executed. |
dgisselq |
2997d 00h |
/zipcpu/trunk/rtl/core/ |
118 |
Fixes two bugs: 1) in the early branching code within the instruction decoder.
This prevented the early branching from working when built with Xilinx's tools,
while the code worked with Verilator. 2) The CPU was not working with the
traditional cache and early branching disabled. These two bugs masked each
other. The replacement code is simpler. |
dgisselq |
3016d 00h |
/zipcpu/trunk/rtl/core/ |
105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
3040d 08h |
/zipcpu/trunk/rtl/core/ |
91 |
Minor updates. |
dgisselq |
3081d 02h |
/zipcpu/trunk/rtl/core/ |
90 |
Removed MOV x(PC),PC from the list of possible early branching instructions.
ADD X,PC and LDI X,PC are now the only recognized early branching instructions.
This was done to spare logic, although I don't think I spared more than a
LUT or two. |
dgisselq |
3081d 02h |
/zipcpu/trunk/rtl/core/ |
88 |
Eliminated some warnings. The div fixes were to simplify the logic, even though
the result is less readable ... |
dgisselq |
3105d 01h |
/zipcpu/trunk/rtl/core/ |
83 |
Added a flag to indicate whether an exception took place on the first
or second half of a VLIW instruction--will be zero in non-VLIW mode,
equivalent to the second half of the instruction having caused the
exception. (Expect these flags to be reordered some time in the future into
a less haphazard ordering ...)
Vastly simplified the pipeline logic, primarily for op_stall, but also touched
opA and opB. (Trying to fit within timing on Spartan 6 ...)
Changed division instruction to include a reset on clear_pipeline, to make
certain [BC $addr; DIV Rx,Ry ] works regardless of whether the condition is
true. |
dgisselq |
3107d 00h |
/zipcpu/trunk/rtl/core/ |
82 |
Found and (I hope) fixed a nasty bug that would send the prefetch into an
endless loop whenever you jumped to an instruction at the last location
in an unloaded cache line. |
dgisselq |
3107d 00h |
/zipcpu/trunk/rtl/core/ |