URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 210

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
210	Check in code fragment implementing HDMI/TMDS encoding. Derived from HDMI_test.v https://www.fpga4fun.com/HDMI.html (c) fpga4fun.com & KNJN LLC 2013	davidgb	1329d 04h	/
209	Started adding in keyboard (not tested). Added in green-only VGA output thru Pmod port to PmodVGA J2 port. Started working on HDMI output	davidgb	1329d 06h	/
208	swapped 32k and 16k ram to use block_spram.	davidgb	1373d 07h	/
207	Updated design to pick up vdu8_spram (which uses parameterized ram for video memory instead of hard macros)	davidgb	1373d 08h	/
206	Update comment/cleanup	davidgb	1373d 08h	/
205	A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory.	davidgb	1373d 08h	/
204	patched up ram for zybo use	davidgb	1373d 08h	/
203	Added a parameterized ram model.	davidgb	1373d 08h	/
202	Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD. This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.	davidgb	1373d 09h	/
201	A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake.	davidgb	1380d 03h	/
200	Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port.	davidgb	1387d 01h	/
199	Add in full RS-232 handshake for PmodUSBUART.	davidgb	1388d 02h	/
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1388d 04h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1395d 01h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1395d 01h	/
195	Switched to using the UART over usb for the console port.	davidgb	1395d 01h	/
194	Finally have a working board.	davidgb	1395d 02h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1395d 05h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1395d 05h	/
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1396d 02h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories System09

[/] - Rev 210

Filtering Options