URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 211

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
211	New version of VDU8 that has HDMI output. Still needs work refactoring clock signals.	davidgb	1332d 07h	/
210	Check in code fragment implementing HDMI/TMDS encoding. Derived from HDMI_test.v https://www.fpga4fun.com/HDMI.html (c) fpga4fun.com & KNJN LLC 2013	davidgb	1332d 07h	/
209	Started adding in keyboard (not tested). Added in green-only VGA output thru Pmod port to PmodVGA J2 port. Started working on HDMI output	davidgb	1332d 09h	/
208	swapped 32k and 16k ram to use block_spram.	davidgb	1376d 10h	/
207	Updated design to pick up vdu8_spram (which uses parameterized ram for video memory instead of hard macros)	davidgb	1376d 11h	/
206	Update comment/cleanup	davidgb	1376d 11h	/
205	A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory.	davidgb	1376d 11h	/
204	patched up ram for zybo use	davidgb	1376d 11h	/
203	Added a parameterized ram model.	davidgb	1376d 11h	/
202	Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD. This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.	davidgb	1376d 12h	/
201	A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake.	davidgb	1383d 06h	/
200	Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port.	davidgb	1390d 04h	/
199	Add in full RS-232 handshake for PmodUSBUART.	davidgb	1391d 05h	/
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1391d 07h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1398d 04h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1398d 04h	/
195	Switched to using the UART over usb for the console port.	davidgb	1398d 05h	/
194	Finally have a working board.	davidgb	1398d 05h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1398d 09h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1398d 09h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories System09

[/] - Rev 211

Filtering Options