URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] - Rev 73

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
73	The patch introduces a new configuration option `A23_RAM_REGISTER_BANK, which controls instantiation of Amber 23 register bank. If the option is set, a ram-based variant of the register bank is instantiated. It can be useful in low-end FPGA designs, where flipflops and muxes are costly. Altera Cyclone III resource utilization: - flipflop-based register bank: 1583 combinationals + 856 registers - ram-based register bank: 268 combinationals + 156 registers Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4231d 21h	/
72	5 bit "OH_USR" constant was used when 2 bit "USR" should be used. Both of the constants are 0. The fault was introduced by ram-based register bank commit. Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4231d 21h	/
71	Original Amber 23 core uses asyncronous implementation of register bank. It leads to some problems with ram-based implementation of the register bank, because at least Altera FPGAs uses syncronous ram blocks, so the whole address needs to be latched. The patch exposes non-registered versions of register select signals to the register bank, so the bank can build address and latch it in the syncronous ram input register. The patch is a pre-requisite for ram-based register bank implementation on Altera FPGA. Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4231d 21h	/
70	The mlas_bug testcase tried to use stack without setting stack pointer register, causing unpredictable behavoiur. The patch uses an expilict stack area for the test. Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4231d 21h	/
69	Updated the spec for ISE 14.5, boot-loader-ethmac.	csantifort	4231d 21h	/
68	Remove modelsim files. Only supporting Xilinx isim now.	csantifort	4231d 22h	/
67	renamed boot-loader.c to boot-loader-serial.c	csantifort	4231d 22h	/
66	Remove the stand-alone ethmac test. Use boot-loader-ethmac instead to verify ethmac functionality.	csantifort	4231d 23h	/
65	Renamed boot-loader to boot-loader-serial	csantifort	4231d 23h	/
64	Support latest Xilinx ISE 14.5 software.	csantifort	4231d 23h	/
63	Add support for Xilinx ISim Verilog simulator. Remove Virtex-6 files.	csantifort	4232d 03h	/
62	Added source for amber-pkt2mem	csantifort	4384d 16h	/
61	Add new netowkr based boot loader. Remove support for Virtex. Spartan 6 only now.	csantifort	4518d 22h	/
60	Bug fix; removed a combinational loop from the a25_decode logic.	csantifort	4736d 18h	/
59	Added modelsim script for reloading a wlf file after a simulation has been rerun.	csantifort	4806d 15h	/
58	Use TB.clk_count for the decompiler messages and removed the local counter	csantifort	4806d 19h	/
57	Add some debug messages	csantifort	4806d 19h	/
56	Remove the timeouts file from svn. Its an output file and gets now just gets created automatically when sims are run for the first time.	csantifort	4806d 19h	/
55	Added sudo to rm mnt command	csantifort	4806d 19h	/
54	Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers was selected for writing to for 1 clock cycle.	csantifort	4823d 18h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories amber

[/] - Rev 73

Filtering Options