URL https://opencores.org/ocsvn/can/can/trunk

Subversion Repositories can

[/] - Rev 35

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
35	Several registers added. Not finished, yet.	mohor	8019d 09h	/
34	Errors monitoring improved. arbitration_lost improved.	mohor	8021d 15h	/
33	abort_tx added.	mohor	8021d 15h	/
32	abort_tx added. Bit destuff fixed.	mohor	8021d 15h	/
31	Wishbone interface added.	mohor	8023d 04h	/
30	CAN is working according to the specification. WB interface and more registers (status, IRQ, ...) needs to be added.	mohor	8023d 13h	/
29	Overload fixed. Hard synchronization also enabled at the last bit of interframe.	mohor	8024d 11h	/
28	Bosch license warning added. Error counters finished. Overload frames still need to be fixed.	mohor	8025d 03h	/
27	This file is not used.	mohor	8029d 12h	/
26	Backup.	mohor	8029d 12h	/
25	* empty log message *	mohor	8029d 15h	/
24	backup.	mohor	8034d 04h	/
23	Fifo corrected to be synthesizable.	mohor	8047d 12h	/
22	Form error supported. When receiving messages, last bit of the end-of-frame does not generate form error. Receiver goes to the idle mode one bit sooner. (CAN specification ver 2.0, part B, page 57).	mohor	8048d 16h	/
21	Data is stored to fifo at the end of ack stage.	mohor	8049d 07h	/
20	CRC checking fixed (when bitstuff occurs at the end of a CRC sequence).	mohor	8049d 08h	/
19	RX state machine fixed to receive "remote request" frames correctly. No data bytes are written to fifo when such frames are received.	mohor	8049d 15h	/
18	When a frame with "remote request" is received, no data is stored to fifo, just the frame information (identifier, ...). Data length that is stored is the received data length and not the actual data length that is stored to fifo.	mohor	8049d 16h	/
17	Addresses corrected to decimal values (previously hex).	mohor	8050d 12h	/
16	rx_fifo is now working.	mohor	8050d 17h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories can

[/] - Rev 35

Filtering Options