OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 278

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.		 mohor 7970d 16h /
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7970d 16h /
276 Defer indication changed. tadejm 7970d 16h /
275 Fix MTxErr or prevent sending too big frames. mohor 7977d 20h /
274 Backup version. Not fully working. tadejm 7978d 10h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 7978d 16h /
272 When control packets were received, they were ignored in some cases. tadejm 7978d 16h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 7979d 17h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7979d 17h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7980d 17h /
268 Release 1.19. Control frame description changed. mohor 8034d 11h /
267 Full duplex control frames tested. mohor 8034d 13h /
266 Flow control test almost finished. mohor 8039d 12h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 8039d 16h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 8039d 16h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 8040d 03h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 8040d 03h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 8040d 03h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 8040d 15h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 8041d 05h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.