URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] - Rev 1159

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
1159	No functional changes. Added defines to disable implementation of multiplier/MAC	lampret	7889d 23h	/
1158	Added simple uart test case.	lampret	7891d 01h	/
1157	Added syscall test case.	lampret	7891d 01h	/
1156	Tick timer test case added.	lampret	7891d 21h	/
1155	No functional change. Only added customization for exception vectors.	lampret	7893d 01h	/
1154	When using tty channel, put the serial port into raw mode (no echo, no CR/LF conversion, no other line discipline/buffering).	sfurman	7900d 17h	/
1153	When multiple interrupts were pending, e.g. TX buffer empty and RX available, reading the UART's IIR register could potentially clear a TX interrupt before it had been sent to the processor, thus dropping the interrupt permanently. Fix tested w/ both eCos and uclinux.	sfurman	7901d 03h	/
1152	* empty log message *	phoenix	7901d 07h	/
1151	* empty log message *	phoenix	7901d 07h	/
1150	remove unneded include	phoenix	7901d 09h	/
1149	* empty log message *	phoenix	7901d 20h	/
1148	* empty log message *	phoenix	7901d 20h	/
1147	remove unneeded include	phoenix	7901d 20h	/
1146	cygwin fix	phoenix	7901d 21h	/
1145	1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the last check-in. 2) Improve printed output from debugging-only uart_status() routine.	sfurman	7901d 21h	/
1144	Speed up gdb when running with serial targets: When generating backtraces, the prologue of each function is scanned at least three times by architecture-independent code, e.g. to determine offsets of saved registers, identify frameless functions, etc. This new code adds straightforward caching of the information gleaned by or1k_scan_prologue() on a per-frame basis rather than storing it in global static variables. (This benefits both JTAG and serial gdb targets, though the JTAG target runs fast enough that it is not particularly needed.) When the register set is dumped by the serial target, e.g. at any breakpoint or interrupt, the 32 vector/FP registers were included in the dump (each 8 bytes long), though they aren't implemented. The new code tells gdb that unimplemented registers have zero length in the dump.	sfurman	7904d 03h	/
1143	Make UART transmitter-empty interrupts match both 16450 and 16550 behavior.	sfurman	7904d 17h	/
1142	Speed up gdb when running with serial targets: When generating backtraces, the prologue of each function is scanned at least three times by architecture-independent code, e.g. to determine offsets of saved registers, identify frameless functions, etc. This new code adds straightforward caching of the information gleaned by or1k_scan_prologue() on a per-frame basis rather than storing it in global static variables. (This benefits both JTAG and serial gdb targets, though the JTAG target runs fast enough that it is not particularly needed.) When the register set is dumped by the serial target, e.g. at any breakpoint or interrupt, the 32 vector/FP registers were included in the dump (each 8 bytes long), though they aren't implemented. The new code tells gdb that unimplemented registers have zero length in the dump.	sfurman	7904d 17h	/
1141	WB = 1/2 RISC clock test code enabled.	lampret	7906d 02h	/
1140	Fixed OR1200_CLKDIV_x_SUPPORTED defines. Fixed order of ifdefs.	lampret	7906d 03h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories or1k

[/] - Rev 1159

Filtering Options