OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] - Rev 1160

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
1160 added missing .rodata.* section into rom linker script phoenix 7865d 07h /
1159 No functional changes. Added defines to disable implementation of multiplier/MAC lampret 7877d 10h /
1158 Added simple uart test case. lampret 7878d 11h /
1157 Added syscall test case. lampret 7878d 12h /
1156 Tick timer test case added. lampret 7879d 08h /
1155 No functional change. Only added customization for exception vectors. lampret 7880d 12h /
1154 When using tty channel, put the serial port into raw mode (no echo, no
CR/LF conversion, no other line discipline/buffering).		 sfurman 7888d 03h /
1153 When multiple interrupts were pending, e.g. TX buffer empty and RX
available, reading the UART's IIR register could potentially clear a
TX interrupt before it had been sent to the processor, thus dropping
the interrupt permanently.

Fix tested w/ both eCos and uclinux.		 sfurman 7888d 14h /
1152 *** empty log message *** phoenix 7888d 17h /
1151 *** empty log message *** phoenix 7888d 18h /
1150 remove unneded include phoenix 7888d 19h /
1149 *** empty log message *** phoenix 7889d 06h /
1148 *** empty log message *** phoenix 7889d 07h /
1147 remove unneeded include phoenix 7889d 07h /
1146 cygwin fix phoenix 7889d 07h /
1145 1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the
last check-in.
2) Improve printed output from debugging-only uart_status() routine.		 sfurman 7889d 07h /
1144 Speed up gdb when running with serial targets:

When generating backtraces, the prologue of each function is scanned
at least three times by architecture-independent code, e.g. to
determine offsets of saved registers, identify frameless functions,
etc. This new code adds straightforward caching of the information
gleaned by or1k_scan_prologue() on a per-frame basis rather than
storing it in global static variables. (This benefits both JTAG and
serial gdb targets, though the JTAG target runs fast enough that it is
not particularly needed.)

When the register set is dumped by the serial target, e.g. at any
breakpoint or interrupt, the 32 vector/FP registers were included in
the dump (each 8 bytes long), though they aren't implemented. The new
code tells gdb that unimplemented registers have zero length in the
dump.		 sfurman 7891d 13h /
1143 Make UART transmitter-empty interrupts match both 16450 and 16550 behavior. sfurman 7892d 04h /
1142 Speed up gdb when running with serial targets:

When generating backtraces, the prologue of each function is scanned
at least three times by architecture-independent code, e.g. to
determine offsets of saved registers, identify frameless functions,
etc. This new code adds straightforward caching of the information
gleaned by or1k_scan_prologue() on a per-frame basis rather than
storing it in global static variables. (This benefits both JTAG and
serial gdb targets, though the JTAG target runs fast enough that it is
not particularly needed.)

When the register set is dumped by the serial target, e.g. at any
breakpoint or interrupt, the 32 vector/FP registers were included in
the dump (each 8 bytes long), though they aren't implemented. The new
code tells gdb that unimplemented registers have zero length in the
dump.		 sfurman 7892d 04h /
1141 WB = 1/2 RISC clock test code enabled. lampret 7893d 13h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.