OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] - Rev 35

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 6008d 18h /
34 For download of v5 dongle tool and manual nuubik 6010d 19h /
33 For download of v5 web release nuubik 6010d 20h /
32 For download of v5 datasheet nuubik 6010d 20h /
31 Newest available schematic nuubik 6011d 12h /
30 Fixed some typos in document nuubik 6011d 12h /
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 6011d 13h /
28 Quartus project files for HW code 5 project files nuubik 6012d 13h /
27 Initial commit of post code logger block and fifo used in the logger nuubik 6012d 13h /
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 6012d 13h /
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 6012d 13h /
24 Added changes for new dongle HW code 5 features nuubik 6012d 13h /
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 6012d 13h /
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 6012d 13h /
21 This commit was manufactured by cvs2svn to create tag 'version_1_4'. 6025d 16h /
20 Fix'ed TAR cycle second part this is not critical update nuubik 6025d 16h /
19 Fix'ed cycle type init code copy/pase mistake nuubik 6025d 18h /
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 6026d 17h /
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 6026d 18h /
16 Synchronisation with OpenCores release nuubik 6159d 15h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.