OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] - Rev 25

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
25 - The div instruction gave wrong results in some corner cases when either
divisor or quotient were the largest negative integer (100000 or -32768).
This is corrected now, for details see ECO-026-div.txt
- some minor updates and fixes to support scripts
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt
wfjm 3762d 21h /
24 - major release w11a_V0.60 (tagged) wfjm 3827d 13h /
23 - major release w11a_V0.60 (tagged)
- after 0.581: documentation updates, no functional changes
- from 0.5 -> 0.6:
- revised ibus and rbus protocol; backend server rewritten; Nexys3 port;
Cypress Fx2 support; LP11,PC11 support
wfjm 3827d 13h /
22 - interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode
wfjm 3835d 14h /
21 - interim release w11a_V0.58 (untagged)
- C++ and Tcl based backend server now fully functional, supports with
DL11, RK11, LP11 and PC11 all devices available in w11a designs
- the old perl based backend server (pi_rri) is obsolete and removed
- operating system kits reorganized
wfjm 4217d 16h /
20 - interim release w11a_V0.57 (untagged)
- new C++ and Tcl based backend server supports now RK11 handling
- w11a systems operate with rlink over USB on nexsy2 and nexsy3 boards.
See w11a_os_guide.txt for details
wfjm 4232d 21h /
19 - interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs
wfjm 4246d 18h /
18 - interim release w11a_V0.561 (untagged)
- Added simple simulation model of Cypress FX2 and test benches for
functional verifcation of FX2 controller
- Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys
- Added test systems for rlink over USB verification for Nexys3 & Atlys
wfjm 4343d 19h /
17 - interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!
wfjm 4347d 14h /
16 - interim release w11a_V0.55 (untagged)
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems
wfjm 4724d 01h /
15 - interim release w11a_V0.54 (untagged)
- add Nexys3 port of w11a
wfjm 4742d 14h /
14 - fix tools/tcl/setup_packages and tools/src/Makefile wfjm 4755d 18h /
13 - interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std
wfjm 4756d 23h /
12 - interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
wfjm 4825d 15h /
11 - final touch-up for V0.53 minor release wfjm 4973d 23h /
10 - add sources for C++/Tcl based backend, add directories
- tools/src/...
- tools/tcl/...
- tools/dox
- tools/make
- add rlink test system
- rtl/sys_gen/tst_rlink/nexys2/...
wfjm 4989d 00h /
9 - interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames
wfjm 5078d 22h /
8 - interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys
wfjm 5114d 12h /
7 tag w11a_V0.5 wfjm 5241d 17h /
6 last touchup of README.txt wfjm 5241d 17h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.