| Rev |
Log message |
Author |
Age |
Path |
| 79 |
Adds 'bench' and 'sw' targets, and automatically builds them (now). |
dgisselq |
3091d 00h |
/ |
| 78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
3091d 00h |
/ |
| 77 |
Adds register names and values for the SD card interface. |
dgisselq |
3091d 00h |
/ |
| 76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
3091d 00h |
/ |
| 75 |
Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.) |
dgisselq |
3091d 00h |
/ |
| 74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
3091d 00h |
/ |
| 73 |
Simplified logic. |
dgisselq |
3091d 00h |
/ |
| 72 |
Sets XULA25 as the default. |
dgisselq |
3091d 00h |
/ |
| 71 |
Needed to play with subtle timing to get this to build. Expect me to play
with these two clock numbers more. |
dgisselq |
3091d 00h |
/ |
| 70 |
Cosmetic (minor) update. |
dgisselq |
3091d 00h |
/ |
| 69 |
Massive logic simplification. This is also the first (verified) working
version. |
dgisselq |
3091d 00h |
/ |
| 68 |
Fixes the debug ack line, so it no longer acks when there isn't a dbg_stb.
Fixed the multiply option parameter, so it sets a 3-clock multiply properly.
Adjusted the watchdog timer so that it now produces a timer that doesn't
reload--since this is pointless for a watchdog. Finally, connects a reset
line to the DMA, to make certain that resetting the CPU will also reset any
ongoing DMA operation. |
dgisselq |
3091d 00h |
/ |
| 67 |
Simplifies logic, and guarantees that the minimum set value will always
produce an int. For example, if the count was X before, setting X-1 wouldn't
produce an interrupt since it had passed. Now it produces an interrupt, and
keeps the next interrupt valid. |
dgisselq |
3091d 00h |
/ |
| 66 |
Simplified logic (barely). |
dgisselq |
3091d 01h |
/ |
| 65 |
Makes the auto-reload feature a parameterized (generic) feature, so the same
code will work for both auto-reloadable and non-autoreloadable (i.e. watchdog)
timers. |
dgisselq |
3091d 01h |
/ |
| 64 |
First (verified) working version. |
dgisselq |
3091d 01h |
/ |
| 63 |
Simplified logic. |
dgisselq |
3091d 01h |
/ |
| 62 |
Removed the pipe logic from the non-pipelined version, and made the NOOP a
specific ALU instruction so that the PC is always properly updated. |
dgisselq |
3091d 01h |
/ |
| 61 |
Fixed the timing control wires: busy and valid will never both be true. Busy
will be true (now) until valid is asserted, and busy will never not be
asserted until valid is true. |
dgisselq |
3091d 01h |
/ |
| 60 |
LONG_MPY upgrade. This is part of swapping out the LDIHI instruction for a
MPY, and the MPYS and MPYU instructions for MPYSHI and MPYUHI respectively. |
dgisselq |
3091d 01h |
/ |
