OpenCores

URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_maccontrol.v] - Rev 353

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Rev	Log message	Author	Age	Path
352	Removed delayed assignments from rtl code	olof	4899d 06h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
349	Make all parameters configurable from top level	olof	4908d 21h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
346	Updated project location	olof	4909d 22h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
338		root	5714d 01h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
335	New directory structure.	root	5771d 06h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
272	When control packets were received, they were ignored in some cases.	tadejm	8009d 02h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
261	Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort synchronized.	mohor	8070d 14h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
256	TxDone and TxAbort changed so they're not propagated to the wishbone module when control frame is transmitted.	mohor	8071d 16h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
251	When control frame (PAUSE) was sent, status was written in the eth_wishbone module and both TXB and TXC interrupts were set. Fixed. Only TXC interrupt is set.	mohor	8072d 22h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
37	Link in the header changed.	mohor	8373d 06h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
22	eth_timescale.v changed to timescale.v This is done because of the simulation of the few cores in a one joined project.	mohor	8469d 07h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v
15	A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). Include files fixed to contain no path. File names and module names changed ta have a eth_ prologue in the name. File eth_timescale.v is used to define timescale All pin names on the top module are changed to contain _I, _O or _OE at the end. Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O and Mdo_OE. The bidirectional signal must be created on the top level. This is done due to the ASIC tools.	mohor	8543d 01h	/ethmac/trunk/rtl/verilog/eth_maccontrol.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.