OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_rxethmac.v] - Rev 345

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
341 Reset AdressMiss signal on new frames to prevent reporting the old status if new frame is short olof 4838d 20h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
338 root 5632d 23h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
335 New directory structure. root 5690d 04h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
330 Warning fixes. igorm 7167d 01h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
321 - Bug connected to the TX_BD_NUM_Wr signal fixed (bug came in with the
previous update of the core.
- TxBDAddress is set to 0 after the TX is enabled in the MODER register.
- RxBDAddress is set to r_TxBDNum<<1 after the RX is enabled in the MODER
register. (thanks to Mathias and Torbjorn)
- Multicast reception was fixed. Thanks to Ulrich Gries
igorm 7467d 22h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
317 Multicast detection fixed. Only the LSB of the first byte is checked. igorm 7508d 04h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 7989d 12h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 7991d 20h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
65 Testbench fixed, code simplified, unused signals removed. mohor 8268d 07h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
62 RxAbort is an output. No need to have is declared as wire. mohor 8269d 00h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
58 File format changed. mohor 8269d 03h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
53 Addition of new module eth_addrcheck.v billditt 8269d 17h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
37 Link in the header changed. mohor 8292d 03h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
22 eth_timescale.v changed to timescale.v This is done because of the
simulation of the few cores in a one joined project.
mohor 8388d 05h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
18 Few little NCSIM warnings fixed. mohor 8426d 00h /ethmac/trunk/rtl/verilog/eth_rxethmac.v
15 A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
Include files fixed to contain no path.
File names and module names changed ta have a eth_ prologue in the name.
File eth_timescale.v is used to define timescale
All pin names on the top module are changed to contain _I, _O or _OE at the end.
Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
and Mdo_OE. The bidirectional signal must be created on the top level. This
is done due to the ASIC tools.
mohor 8461d 23h /ethmac/trunk/rtl/verilog/eth_rxethmac.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.