OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [verilator/] [utils/] [setup/] [minsoc-install.sh] - Rev 147

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
139 Creating a verilator branche. rfajardo 4758d 10h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
138 DIR_TO_INSTALL creation using wizard ConX. 4758d 22h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
136 Installation on Ubuntu-11.10 has shown that a binary called makeinfo is required to install GDB. This binary can be installed on Ubuntu by installing the package texinfo. rfajardo 4766d 05h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
115 configure.sh script dir aware.
minsoc-install.sh logging to script dir.		 rfajardo 4784d 06h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
114 Installation and Configuration scripts can be run out of any directory.
They assume they are going to process the files and directories found in the directory they are run from.		 rfajardo 4784d 06h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
113 minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error

spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated

prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files		 rfajardo 4784d 06h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
112 Updating installation & configuration scripts. rfajardo 4784d 21h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
111 minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh rfajardo 4784d 22h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
110 Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure

-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0

-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.

-prj/src: or1200_top.prj downdated to definition of or1200_v1		 rfajardo 4784d 22h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
109 Creating a branche for release candidate 1.0. rfajardo 4785d 00h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
106 Installation script was checking the ENV variable before setting it. rfajardo 4785d 09h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
103 But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. rfajardo 4795d 00h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
102 GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. rfajardo 4795d 00h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
83 minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. rfajardo 4847d 10h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
82 minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. rfajardo 4850d 10h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
81 Installation script complete, nice text feedback, output logs and better execution order. rfajardo 4850d 21h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
79 minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated		 rfajardo 4854d 02h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
78 minsoc-install.sh: Advanced JTAG bridge compilation needs to know where the dynamic libraries are on runtime. Patching (sed) the Makefile to compile it with the rpath to the libraries (libusb/libftdi). rfajardo 4854d 02h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
77 New tool requirements for installing Icarus Verilog. rfajardo 4854d 02h /minsoc/branches/verilator/utils/setup/minsoc-install.sh
76 Including a script allowing the installation of MinSoC and all its required tools.

It should be working for all Linuxes and Cygwin.		 rfajardo 4854d 02h /minsoc/branches/verilator/utils/setup/minsoc-install.sh

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.