| Rev |
Log message |
Author |
Age |
Path |
| 316 |
More code cleanup and comments,
Removed INT_VECTOR_n constants, as they are superfluous. There are no reasonable situations in which the constants would be altered. |
jshamlet |
535d 13h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 314 |
Code cleanup and added comments |
jshamlet |
535d 15h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 298 |
Fixed a long-standing bug in the SBC instruction where the 1 wasn't being added to complete the 2's complement of Rn. This was causing off-by-one errors in subtraction and negating carry only subtractions. |
jshamlet |
845d 08h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 290 |
Added an additional generic "Rotation_Ignores_Carry" that removes the carry logic from the ROL/ROR instructions such that they now rotate 'normally',
Added an alias for PSR_GP4 named PSR_S, as it is now used to switch the function of the RSP instruction. The internal opcode hasn't changed, but it allows assembly code to use PSR_S or BRS/BNS when performing RSP related operations. |
jshamlet |
1280d 06h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 270 |
Moved CPU internal constants to o8_cpu.vhd and replace the generic that set the RSP direction flag with a constant instead. This removes the need to expose internal architectural flags externally.
Also added a hard-coded version register that takes a major and minor value as bytes using generics. This is a read-only register to the CPU. |
jshamlet |
1472d 14h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 269 |
Modified the write data path to use separate enumerated states rather than reuse the .reg field to improve performance. |
jshamlet |
1475d 03h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 264 |
Updated comments |
jshamlet |
1577d 10h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1577d 10h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 260 |
Added missing comments for Sequential_Interrupts generic, as well as comments explaining portions of the CPU operations. |
jshamlet |
1606d 12h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 256 |
Removed unused generic from the status_led.vhd and cleaned up comments on the CPU |
jshamlet |
1607d 13h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1607d 18h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1608d 09h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 253 |
Fixed spelling error in comment |
jshamlet |
1608d 09h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1608d 09h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 248 |
Removed Default_Int_Flag generic from CPU, as it is duplicated by Supervisor_Mode. |
jshamlet |
1624d 17h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 245 |
Modified the CPU's Supervisor_Mode to also protect SMSK and RSP instructions,
Added an external interrupt manager, o8_int_mgr.vhd. |
jshamlet |
1627d 14h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 244 |
Added two new generics to the CPU model. The first is a supervisory mode that disables the STP PSR_I instruction. This prevents errant code execution from setting the I bit, and disabling any subsequent memory protection logic. The second allows the default state of the I bit to be set at startup. If set true, initialization code will run with the I bit set, allowing it to bypass memory protection.
Also modified the RAM models to include write mask logic, where the mask register is write-protected by the I bit in the CPU. When enabled, the models will prevent code from writing to memory regions which do not have their mask bits set. The upshot is that code can effectively "write protect" the RAM - which is useful for multitasking applications.
Also, most modules have been updated with write qualification inputs, allowing a similar scheme to be used for I/O, though not as elegantly. I use a register module, whose own write qual line is attached to the external copy of the I bit as an I/O write protect register.
Lastly, added a new externally triggered timer, which can generate pulses with programmable delays and widths, and which can interrupt on either the input trigger, the output rising edge, or output falling edge. The time base can be either the internal microsecond tick signal, or an external clock. |
jshamlet |
1628d 11h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 227 |
Added a demonstration Open8_cfg.vhd file, which is used to configure the system constants. It also provides a function that makes it easy to merge read buses. |
jshamlet |
1662d 12h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 225 |
Added Halt_Ack to go with Halt_Req. |
jshamlet |
1662d 16h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
| 224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1662d 18h |
/open8_urisc/trunk/VHDL/o8_cpu.vhd |
